!C99Shell v. 2.0 [PHP 7 Update] [25.02.2019]!

Software: nginx/1.23.4. PHP/5.6.40-65+ubuntu20.04.1+deb.sury.org+1 

uname -a: Linux foro-restaurado-2 5.15.0-1040-oracle #46-Ubuntu SMP Fri Jul 14 21:47:21 UTC 2023
aarch64
 

uid=33(www-data) gid=33(www-data) groups=33(www-data) 

Safe-mode: OFF (not secure)

/usr/share/doc/sg3-utils/examples/   drwxr-xr-x
Free 83.25 GB of 96.73 GB (86.07%)
Home    Back    Forward    UPDIR    Refresh    Search    Buffer    Encoder    Tools    Proc.    FTP brute    Sec.    SQL    PHP-code    Update    Feedback    Self remove    Logout    


Viewing file:     sg_unmap_example.txt (1.53 KB)      -rw-r--r--
Select action/file-type:
(+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) |
#                sg_unmap_example.txt
# This is an example of the contents of a file that can be given to sg_unmap
# For example, assume the /dev/sdc is a scratch disk (e.g. one made by the
# scsi_debug kernel module) then:
#    sg_unmap --in=sg_unmap_example.txt /dev/sdc

0x12345677,1	# unmap LBA 0x12345677
0x12345678 2	# unmap LBA 0x12345678 and 0x12345679
0x12340000 3333	# unmap 3333 blocks starting at LBA 0x12340000

0X5a5a5a5a5a	0  # unmaps 0 blocks (i.e. does nothing)

    a5a5a5h
7		# unmap 7 blocks starting at LBA 0xa5a5a5

# Note that there can be leading and trailing whitespace and whitespace
# (plus comma) can be a separator.
#
# Example invocation:
# $ sg_unmap --in=../examples/sg_unmap_example.txt -vv /dev/sdc
# open /dev/sg2 with flags=0x802
#     unmap cdb: 42 00 00 00 00 00 00 00 58 00
#     unmap parameter list:
#         00 56 00 50 00 00 00 00  00 00 00 00 12 34 56 77
#         00 00 00 01 00 00 00 00  00 00 00 00 12 34 56 78
#         00 00 00 02 00 00 00 00  00 00 00 00 12 34 00 00
#         00 00 0d 05 00 00 00 00  00 00 00 5a 5a 5a 5a 5a
#         00 00 00 00 00 00 00 00  00 00 00 00 00 a5 a5 a5
#         00 00 00 07 00 00 00 00
# sg_cmds_process_resp: slen=18
# unmap:  Fixed format, current;  Sense key: Illegal Request
#  Additional sense: Invalid command operation code
#  Raw sense data (in hex):
#         70 00 05 00 00 00 00 0a  00 00 00 00 20 00 00 00
#         00 00
# UNMAP not supported
#
# --------------------------------------------------------
# Notice the 8 byte header then 5 descriptors in the parameter
# list

:: Command execute ::

Enter:
 
Select:
 

:: Search ::
  - regexp 

:: Upload ::
 
[ Read-Only ]

:: Make Dir ::
 
[ Read-Only ]
:: Make File ::
 
[ Read-Only ]

:: Go Dir ::
 
:: Go File ::
 

--[ c99shell v. 2.0 [PHP 7 Update] [25.02.2019] maintained by HackingTool | HackingTool | Generation time: 0.0045 ]--