Viewing file: cache.h (3.66 KB) -rw-r--r-- Select action/file-type: (+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) */
#ifndef __ARC_ASM_CACHE_H #define __ARC_ASM_CACHE_H
/* In case $$ not config, setup a dummy number for rest of kernel */ #ifndef CONFIG_ARC_CACHE_LINE_SHIFT #define L1_CACHE_SHIFT 6 #else #define L1_CACHE_SHIFT CONFIG_ARC_CACHE_LINE_SHIFT #endif
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) #define CACHE_LINE_MASK (~(L1_CACHE_BYTES - 1))
/* * ARC700 doesn't cache any access in top 1G (0xc000_0000 to 0xFFFF_FFFF) * Ideal for wiring memory mapped peripherals as we don't need to do * explicit uncached accesses (LD.di/ST.di) hence more portable drivers */ #define ARC_UNCACHED_ADDR_SPACE 0xc0000000
#ifndef __ASSEMBLY__
#include <linux/build_bug.h>
/* Uncached access macros */ #define arc_read_uncached_32(ptr) \ ({ \ unsigned int __ret; \ __asm__ __volatile__( \ " ld.di %0, [%1] \n" \ : "=r"(__ret) \ : "r"(ptr)); \ __ret; \ })
#define arc_write_uncached_32(ptr, data)\ ({ \ __asm__ __volatile__( \ " st.di %0, [%1] \n" \ : \ : "r"(data), "r"(ptr)); \ })
/* Largest line length for either L1 or L2 is 128 bytes */ #define SMP_CACHE_BYTES 128 #define cache_line_size() SMP_CACHE_BYTES #define ARCH_DMA_MINALIGN SMP_CACHE_BYTES
/* * Make sure slab-allocated buffers are 64-bit aligned when atomic64_t uses * ARCv2 64-bit atomics (LLOCKD/SCONDD). This guarantess runtime 64-bit * alignment for any atomic64_t embedded in buffer. * Default ARCH_SLAB_MINALIGN is __alignof__(long long) which has a relaxed * value of 4 (and not 8) in ARC ABI. */ #if defined(CONFIG_ARC_HAS_LL64) && defined(CONFIG_ARC_HAS_LLSC) #define ARCH_SLAB_MINALIGN 8 #endif
extern void arc_cache_init(void); extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len); extern void read_decode_cache_bcr(void);
extern int ioc_enable; extern unsigned long perip_base, perip_end;
#endif /* !__ASSEMBLY__ */
/* Instruction cache related Auxiliary registers */ #define ARC_REG_IC_BCR 0x77 /* Build Config reg */ #define ARC_REG_IC_IVIC 0x10 #define ARC_REG_IC_CTRL 0x11 #define ARC_REG_IC_IVIR 0x16 #define ARC_REG_IC_ENDR 0x17 #define ARC_REG_IC_IVIL 0x19 #define ARC_REG_IC_PTAG 0x1E #define ARC_REG_IC_PTAG_HI 0x1F
/* Bit val in IC_CTRL */ #define IC_CTRL_DIS 0x1
/* Data cache related Auxiliary registers */ #define ARC_REG_DC_BCR 0x72 /* Build Config reg */ #define ARC_REG_DC_IVDC 0x47 #define ARC_REG_DC_CTRL 0x48 #define ARC_REG_DC_IVDL 0x4A #define ARC_REG_DC_FLSH 0x4B #define ARC_REG_DC_FLDL 0x4C #define ARC_REG_DC_STARTR 0x4D #define ARC_REG_DC_ENDR 0x4E #define ARC_REG_DC_PTAG 0x5C #define ARC_REG_DC_PTAG_HI 0x5F
/* Bit val in DC_CTRL */ #define DC_CTRL_DIS 0x001 #define DC_CTRL_INV_MODE_FLUSH 0x040 #define DC_CTRL_FLUSH_STATUS 0x100 #define DC_CTRL_RGN_OP_INV 0x200 #define DC_CTRL_RGN_OP_MSK 0x200
/*System-level cache (L2 cache) related Auxiliary registers */ #define ARC_REG_SLC_CFG 0x901 #define ARC_REG_SLC_CTRL 0x903 #define ARC_REG_SLC_FLUSH 0x904 #define ARC_REG_SLC_INVALIDATE 0x905 #define ARC_AUX_SLC_IVDL 0x910 #define ARC_AUX_SLC_FLDL 0x912 #define ARC_REG_SLC_RGN_START 0x914 #define ARC_REG_SLC_RGN_START1 0x915 #define ARC_REG_SLC_RGN_END 0x916 #define ARC_REG_SLC_RGN_END1 0x917
/* Bit val in SLC_CONTROL */ #define SLC_CTRL_DIS 0x001 #define SLC_CTRL_IM 0x040 #define SLC_CTRL_BUSY 0x100 #define SLC_CTRL_RGN_OP_INV 0x200
/* IO coherency related Auxiliary registers */ #define ARC_REG_IO_COH_ENABLE 0x500 #define ARC_IO_COH_ENABLE_BIT BIT(0) #define ARC_REG_IO_COH_PARTIAL 0x501 #define ARC_IO_COH_PARTIAL_BIT BIT(0) #define ARC_REG_IO_COH_AP0_BASE 0x508 #define ARC_REG_IO_COH_AP0_SIZE 0x509
#endif /* _ASM_CACHE_H */
|