Viewing file:  mmu_context.h (5.58 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* vineetg: May 2011
* -Refactored get_new_mmu_context( ) to only handle live-mm.
* retiring-mm handled in other hooks
*
* Vineetg: March 25th, 2008: Bug #92690
* -Major rewrite of Core ASID allocation routine get_new_mmu_context
*
* Amit Bhor, Sameer Dhavale: Codito Technologies 2004
*/
#ifndef _ASM_ARC_MMU_CONTEXT_H
#define _ASM_ARC_MMU_CONTEXT_H
#include <asm/arcregs.h>
#include <asm/tlb.h>
#include <linux/sched/mm.h>
#include <asm-generic/mm_hooks.h>
/* ARC700 ASID Management
*
* ARC MMU provides 8-bit ASID (0..255) to TAG TLB entries, allowing entries
* with same vaddr (different tasks) to co-exit. This provides for
* "Fast Context Switch" i.e. no TLB flush on ctxt-switch
*
* Linux assigns each task a unique ASID. A simple round-robin allocation
* of H/w ASID is done using software tracker @asid_cpu.
* When it reaches max 255, the allocation cycle starts afresh by flushing
* the entire TLB and wrapping ASID back to zero.
*
* A new allocation cycle, post rollover, could potentially reassign an ASID
* to a different task. Thus the rule is to refresh the ASID in a new cycle.
* The 32 bit @asid_cpu (and mm->asid) have 8 bits MMU PID and rest 24 bits
* serve as cycle/generation indicator and natural 32 bit unsigned math
* automagically increments the generation when lower 8 bits rollover.
*/
#define MM_CTXT_ASID_MASK 0x000000ff /* MMU PID reg :8 bit PID */
#define MM_CTXT_CYCLE_MASK (~MM_CTXT_ASID_MASK)
#define MM_CTXT_FIRST_CYCLE (MM_CTXT_ASID_MASK + 1)
#define MM_CTXT_NO_ASID 0UL
#define asid_mm(mm, cpu) mm->context.asid[cpu]
#define hw_pid(mm, cpu) (asid_mm(mm, cpu) & MM_CTXT_ASID_MASK)
DECLARE_PER_CPU(unsigned int, asid_cache);
#define asid_cpu(cpu) per_cpu(asid_cache, cpu)
/*
* Get a new ASID if task doesn't have a valid one (unalloc or from prev cycle)
* Also set the MMU PID register to existing/updated ASID
*/
static inline void get_new_mmu_context(struct mm_struct *mm)
{
const unsigned int cpu = smp_processor_id();
unsigned long flags;
local_irq_save(flags);
/*
* Move to new ASID if it was not from current alloc-cycle/generation.
* This is done by ensuring that the generation bits in both mm->ASID
* and cpu's ASID counter are exactly same.
*
* Note: Callers needing new ASID unconditionally, independent of
* generation, e.g. local_flush_tlb_mm() for forking parent,
* first need to destroy the context, setting it to invalid
* value.
*/
if (!((asid_mm(mm, cpu) ^ asid_cpu(cpu)) & MM_CTXT_CYCLE_MASK))
goto set_hw;
/* move to new ASID and handle rollover */
if (unlikely(!(++asid_cpu(cpu) & MM_CTXT_ASID_MASK))) {
local_flush_tlb_all();
/*
* Above check for rollover of 8 bit ASID in 32 bit container.
* If the container itself wrapped around, set it to a non zero
* "generation" to distinguish from no context
*/
if (!asid_cpu(cpu))
asid_cpu(cpu) = MM_CTXT_FIRST_CYCLE;
}
/* Assign new ASID to tsk */
asid_mm(mm, cpu) = asid_cpu(cpu);
set_hw:
write_aux_reg(ARC_REG_PID, hw_pid(mm, cpu) | MMU_ENABLE);
local_irq_restore(flags);
}
/*
* Initialize the context related info for a new mm_struct
* instance.
*/
#define init_new_context init_new_context
static inline int
init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
int i;
for_each_possible_cpu(i)
asid_mm(mm, i) = MM_CTXT_NO_ASID;
return 0;
}
#define destroy_context destroy_context
static inline void destroy_context(struct mm_struct *mm)
{
unsigned long flags;
/* Needed to elide CONFIG_DEBUG_PREEMPT warning */
local_irq_save(flags);
asid_mm(mm, smp_processor_id()) = MM_CTXT_NO_ASID;
local_irq_restore(flags);
}
/* Prepare the MMU for task: setup PID reg with allocated ASID
If task doesn't have an ASID (never alloc or stolen, get a new ASID)
*/
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
const int cpu = smp_processor_id();
/*
* Note that the mm_cpumask is "aggregating" only, we don't clear it
* for the switched-out task, unlike some other arches.
* It is used to enlist cpus for sending TLB flush IPIs and not sending
* it to CPUs where a task once ran-on, could cause stale TLB entry
* re-use, specially for a multi-threaded task.
* e.g. T1 runs on C1, migrates to C3. T2 running on C2 munmaps.
* For a non-aggregating mm_cpumask, IPI not sent C1, and if T1
* were to re-migrate to C1, it could access the unmapped region
* via any existing stale TLB entries.
*/
cpumask_set_cpu(cpu, mm_cpumask(next));
#ifdef ARC_USE_SCRATCH_REG
/* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */
write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd);
#endif
get_new_mmu_context(next);
}
/*
* activate_mm defaults (in asm-generic) to switch_mm and is called at the
* time of execve() to get a new ASID Note the subtlety here:
* get_new_mmu_context() behaves differently here vs. in switch_mm(). Here
* it always returns a new ASID, because mm has an unallocated "initial"
* value, while in latter, it moves to a new ASID, only if it was
* unallocated
*/
/* it seemed that deactivate_mm( ) is a reasonable place to do book-keeping
* for retiring-mm. However destroy_context( ) still needs to do that because
* between mm_release( ) = >deactive_mm( ) and
* mmput => .. => __mmdrop( ) => destroy_context( )
* there is a good chance that task gets sched-out/in, making it's ASID valid
* again (this teased me for a whole day).
*/
#include <asm-generic/mmu_context.h>
#endif /* __ASM_ARC_MMU_CONTEXT_H */
|