Viewing file:  romimage.h (1.04 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0 */
#ifdef __ASSEMBLY__
/* EcoVec board specific boot code:
* converts the "partner-jet-script.txt" script into assembly
* the assembly code is the first code to be executed in the romImage
*/
#include <asm/romimage-macros.h>
#include <mach/partner-jet-setup.txt>
/* execute icbi after enabling cache */
mov.l 1f, r0
icbi @r0
/* jump to cached area */
mova 2f, r0
jmp @r0
nop
.align 2
1 : .long 0xa8000000
2 :
#else /* __ASSEMBLY__ */
/* Ecovec board specific information:
*
* Set the following to enable MMCIF boot from the MMC card in CN12:
*
* DS1.5 = OFF (SH BOOT pin set to L)
* DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
* DS2.7 = ON (Select MMCIF on CN12 instead of SDHI1)
*
*/
#define HIZCRA 0xa4050158
#define PGDR 0xa405012c
static inline void mmcif_update_progress(int nr)
{
/* disable Hi-Z for LED pins */
__raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
/* update progress on LED4, LED5, LED6 and LED7 */
__raw_writeb(1 << (nr - 1), PGDR);
}
#endif /* __ASSEMBLY__ */
|