Viewing file:  elf.h (5 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* include/asm-xtensa/elf.h
*
* ELF register definitions
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2001 - 2005 Tensilica Inc.
*/
#ifndef _XTENSA_ELF_H
#define _XTENSA_ELF_H
#include <asm/ptrace.h>
#include <asm/coprocessor.h>
#include <linux/elf-em.h>
/* Xtensa processor ELF architecture-magic number */
#define EM_XTENSA_OLD 0xABC7
/* Xtensa relocations defined by the ABIs */
#define R_XTENSA_NONE 0
#define R_XTENSA_32 1
#define R_XTENSA_RTLD 2
#define R_XTENSA_GLOB_DAT 3
#define R_XTENSA_JMP_SLOT 4
#define R_XTENSA_RELATIVE 5
#define R_XTENSA_PLT 6
#define R_XTENSA_OP0 8
#define R_XTENSA_OP1 9
#define R_XTENSA_OP2 10
#define R_XTENSA_ASM_EXPAND 11
#define R_XTENSA_ASM_SIMPLIFY 12
#define R_XTENSA_GNU_VTINHERIT 15
#define R_XTENSA_GNU_VTENTRY 16
#define R_XTENSA_DIFF8 17
#define R_XTENSA_DIFF16 18
#define R_XTENSA_DIFF32 19
#define R_XTENSA_SLOT0_OP 20
#define R_XTENSA_SLOT1_OP 21
#define R_XTENSA_SLOT2_OP 22
#define R_XTENSA_SLOT3_OP 23
#define R_XTENSA_SLOT4_OP 24
#define R_XTENSA_SLOT5_OP 25
#define R_XTENSA_SLOT6_OP 26
#define R_XTENSA_SLOT7_OP 27
#define R_XTENSA_SLOT8_OP 28
#define R_XTENSA_SLOT9_OP 29
#define R_XTENSA_SLOT10_OP 30
#define R_XTENSA_SLOT11_OP 31
#define R_XTENSA_SLOT12_OP 32
#define R_XTENSA_SLOT13_OP 33
#define R_XTENSA_SLOT14_OP 34
#define R_XTENSA_SLOT0_ALT 35
#define R_XTENSA_SLOT1_ALT 36
#define R_XTENSA_SLOT2_ALT 37
#define R_XTENSA_SLOT3_ALT 38
#define R_XTENSA_SLOT4_ALT 39
#define R_XTENSA_SLOT5_ALT 40
#define R_XTENSA_SLOT6_ALT 41
#define R_XTENSA_SLOT7_ALT 42
#define R_XTENSA_SLOT8_ALT 43
#define R_XTENSA_SLOT9_ALT 44
#define R_XTENSA_SLOT10_ALT 45
#define R_XTENSA_SLOT11_ALT 46
#define R_XTENSA_SLOT12_ALT 47
#define R_XTENSA_SLOT13_ALT 48
#define R_XTENSA_SLOT14_ALT 49
/* ELF register definitions. This is needed for core dump support. */
typedef unsigned long elf_greg_t;
typedef struct user_pt_regs xtensa_gregset_t;
#define ELF_NGREG (sizeof(xtensa_gregset_t) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
#define ELF_NFPREG 18
typedef unsigned int elf_fpreg_t;
typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
/*
* This is used to ensure we don't load something for the wrong architecture.
*/
#define elf_check_arch(x) ( ( (x)->e_machine == EM_XTENSA ) || \
( (x)->e_machine == EM_XTENSA_OLD ) )
/*
* These are used to set parameters in the core dumps.
*/
#ifdef __XTENSA_EL__
# define ELF_DATA ELFDATA2LSB
#elif defined(__XTENSA_EB__)
# define ELF_DATA ELFDATA2MSB
#else
# error processor byte order undefined!
#endif
#define ELF_CLASS ELFCLASS32
#define ELF_ARCH EM_XTENSA
#define ELF_EXEC_PAGESIZE PAGE_SIZE
#define CORE_DUMP_USE_REGSET
/*
* This is the location that an ET_DYN program is loaded if exec'ed. Typical
* use of this is to invoke "./ld.so someprog" to test out a new version of
* the loader. We need to make sure that it is out of the way of the program
* that it will "exec", and that there is sufficient room for the brk.
*/
#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
/*
* This yields a mask that user programs can use to figure out what
* instruction set this CPU supports. This could be done in user space,
* but it's not easy, and we've already done it here.
*/
#define ELF_HWCAP (0)
/*
* This yields a string that ld.so will use to load implementation
* specific libraries for optimization. This is more specific in
* intent than poking at uname or /proc/cpuinfo.
* For the moment, we have only optimizations for the Intel generations,
* but that could change...
*/
#define ELF_PLATFORM (NULL)
/*
* The Xtensa processor ABI says that when the program starts, a2
* contains a pointer to a function which might be registered using
* `atexit'. This provides a mean for the dynamic linker to call
* DT_FINI functions for shared libraries that have been loaded before
* the code runs.
*
* A value of 0 tells we have no such handler.
*
* We might as well make sure everything else is cleared too (except
* for the stack pointer in a1), just to make things more
* deterministic. Also, clearing a0 terminates debugger backtraces.
*/
#define ELF_PLAT_INIT(_r, load_addr) \
do { _r->areg[0]=0; /*_r->areg[1]=0;*/ _r->areg[2]=0; _r->areg[3]=0; \
_r->areg[4]=0; _r->areg[5]=0; _r->areg[6]=0; _r->areg[7]=0; \
_r->areg[8]=0; _r->areg[9]=0; _r->areg[10]=0; _r->areg[11]=0; \
_r->areg[12]=0; _r->areg[13]=0; _r->areg[14]=0; _r->areg[15]=0; \
} while (0)
typedef struct {
xtregs_opt_t opt;
xtregs_user_t user;
#if XTENSA_HAVE_COPROCESSORS
xtregs_cp0_t cp0;
xtregs_cp1_t cp1;
xtregs_cp2_t cp2;
xtregs_cp3_t cp3;
xtregs_cp4_t cp4;
xtregs_cp5_t cp5;
xtregs_cp6_t cp6;
xtregs_cp7_t cp7;
#endif
} elf_xtregs_t;
#define SET_PERSONALITY(ex) \
set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
#endif /* _XTENSA_ELF_H */
|