Viewing file:  cpm.h (5.08 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __CPM_H
#define __CPM_H
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/of.h>
#include <soc/fsl/qe/qe.h>
/*
* SPI Parameter RAM common to QE and CPM.
*/
struct spi_pram {
__be16 rbase; /* Rx Buffer descriptor base address */
__be16 tbase; /* Tx Buffer descriptor base address */
u8 rfcr; /* Rx function code */
u8 tfcr; /* Tx function code */
__be16 mrblr; /* Max receive buffer length */
__be32 rstate; /* Internal */
__be32 rdp; /* Internal */
__be16 rbptr; /* Internal */
__be16 rbc; /* Internal */
__be32 rxtmp; /* Internal */
__be32 tstate; /* Internal */
__be32 tdp; /* Internal */
__be16 tbptr; /* Internal */
__be16 tbc; /* Internal */
__be32 txtmp; /* Internal */
__be32 res; /* Tx temp. */
__be16 rpbase; /* Relocation pointer (CPM1 only) */
__be16 res1; /* Reserved */
};
/*
* USB Controller pram common to QE and CPM.
*/
struct usb_ctlr {
u8 usb_usmod;
u8 usb_usadr;
u8 usb_uscom;
u8 res1[1];
__be16 usb_usep[4];
u8 res2[4];
__be16 usb_usber;
u8 res3[2];
__be16 usb_usbmr;
u8 res4[1];
u8 usb_usbs;
/* Fields down below are QE-only */
__be16 usb_ussft;
u8 res5[2];
__be16 usb_usfrn;
u8 res6[0x22];
} __attribute__ ((packed));
/*
* Function code bits, usually generic to devices.
*/
#ifdef CONFIG_CPM1
#define CPMFCR_GBL ((u_char)0x00) /* Flag doesn't exist in CPM1 */
#define CPMFCR_TC2 ((u_char)0x00) /* Flag doesn't exist in CPM1 */
#define CPMFCR_DTB ((u_char)0x00) /* Flag doesn't exist in CPM1 */
#define CPMFCR_BDB ((u_char)0x00) /* Flag doesn't exist in CPM1 */
#else
#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
#endif
#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
/* Opcodes common to CPM1 and CPM2
*/
#define CPM_CR_INIT_TRX ((ushort)0x0000)
#define CPM_CR_INIT_RX ((ushort)0x0001)
#define CPM_CR_INIT_TX ((ushort)0x0002)
#define CPM_CR_HUNT_MODE ((ushort)0x0003)
#define CPM_CR_STOP_TX ((ushort)0x0004)
#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)
#define CPM_CR_RESTART_TX ((ushort)0x0006)
#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007)
#define CPM_CR_SET_GADDR ((ushort)0x0008)
#define CPM_CR_SET_TIMER ((ushort)0x0008)
#define CPM_CR_STOP_IDMA ((ushort)0x000b)
/* Buffer descriptors used by many of the CPM protocols. */
typedef struct cpm_buf_desc {
ushort cbd_sc; /* Status and Control */
ushort cbd_datlen; /* Data length in buffer */
uint cbd_bufaddr; /* Buffer address in host memory */
} cbd_t;
/* Buffer descriptor control/status used by serial
*/
#define BD_SC_EMPTY (0x8000) /* Receive is empty */
#define BD_SC_READY (0x8000) /* Transmit is ready */
#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */
#define BD_SC_INTRPT (0x1000) /* Interrupt on change */
#define BD_SC_LAST (0x0800) /* Last buffer in frame */
#define BD_SC_TC (0x0400) /* Transmit CRC */
#define BD_SC_CM (0x0200) /* Continuous mode */
#define BD_SC_ID (0x0100) /* Rec'd too many idles */
#define BD_SC_P (0x0100) /* xmt preamble */
#define BD_SC_BR (0x0020) /* Break received */
#define BD_SC_FR (0x0010) /* Framing error */
#define BD_SC_PR (0x0008) /* Parity error */
#define BD_SC_NAK (0x0004) /* NAK - did not respond */
#define BD_SC_OV (0x0002) /* Overrun */
#define BD_SC_UN (0x0002) /* Underrun */
#define BD_SC_CD (0x0001) /* */
#define BD_SC_CL (0x0001) /* Collision */
/* Buffer descriptor control/status used by Ethernet receive.
* Common to SCC and FCC.
*/
#define BD_ENET_RX_EMPTY (0x8000)
#define BD_ENET_RX_WRAP (0x2000)
#define BD_ENET_RX_INTR (0x1000)
#define BD_ENET_RX_LAST (0x0800)
#define BD_ENET_RX_FIRST (0x0400)
#define BD_ENET_RX_MISS (0x0100)
#define BD_ENET_RX_BC (0x0080) /* FCC Only */
#define BD_ENET_RX_MC (0x0040) /* FCC Only */
#define BD_ENET_RX_LG (0x0020)
#define BD_ENET_RX_NO (0x0010)
#define BD_ENET_RX_SH (0x0008)
#define BD_ENET_RX_CR (0x0004)
#define BD_ENET_RX_OV (0x0002)
#define BD_ENET_RX_CL (0x0001)
#define BD_ENET_RX_STATS (0x01ff) /* All status bits */
/* Buffer descriptor control/status used by Ethernet transmit.
* Common to SCC and FCC.
*/
#define BD_ENET_TX_READY (0x8000)
#define BD_ENET_TX_PAD (0x4000)
#define BD_ENET_TX_WRAP (0x2000)
#define BD_ENET_TX_INTR (0x1000)
#define BD_ENET_TX_LAST (0x0800)
#define BD_ENET_TX_TC (0x0400)
#define BD_ENET_TX_DEF (0x0200)
#define BD_ENET_TX_HB (0x0100)
#define BD_ENET_TX_LC (0x0080)
#define BD_ENET_TX_RL (0x0040)
#define BD_ENET_TX_RCMASK (0x003c)
#define BD_ENET_TX_UN (0x0002)
#define BD_ENET_TX_CSL (0x0001)
#define BD_ENET_TX_STATS (0x03ff) /* All status bits */
/* Buffer descriptor control/status used by Transparent mode SCC.
*/
#define BD_SCC_TX_LAST (0x0800)
/* Buffer descriptor control/status used by I2C.
*/
#define BD_I2C_START (0x0400)
#ifdef CONFIG_CPM
int cpm_command(u32 command, u8 opcode);
#else
static inline int cpm_command(u32 command, u8 opcode)
{
return -ENOSYS;
}
#endif /* CONFIG_CPM */
int cpm2_gpiochip_add32(struct device *dev);
#endif
|