Viewing file:  mlxreg.h (7.54 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
/*
* Copyright (C) 2017-2020 Mellanox Technologies Ltd.
*/
#ifndef __LINUX_PLATFORM_DATA_MLXREG_H
#define __LINUX_PLATFORM_DATA_MLXREG_H
#define MLXREG_CORE_LABEL_MAX_SIZE 32
#define MLXREG_CORE_WD_FEATURE_NOWAYOUT BIT(0)
#define MLXREG_CORE_WD_FEATURE_START_AT_BOOT BIT(1)
/**
* enum mlxreg_wdt_type - type of HW watchdog
*
* TYPE1 HW watchdog implementation exist in old systems.
* All new systems have TYPE2 HW watchdog.
* TYPE3 HW watchdog can exist on all systems with new CPLD.
* TYPE3 is selected by WD capability bit.
*/
enum mlxreg_wdt_type {
MLX_WDT_TYPE1,
MLX_WDT_TYPE2,
MLX_WDT_TYPE3,
};
/**
* enum mlxreg_hotplug_kind - kind of hotplug entry
*
* @MLXREG_HOTPLUG_DEVICE_NA: do not care;
* @MLXREG_HOTPLUG_LC_PRESENT: entry for line card presence in/out events;
* @MLXREG_HOTPLUG_LC_VERIFIED: entry for line card verification status events
* coming after line card security signature validation;
* @MLXREG_HOTPLUG_LC_POWERED: entry for line card power on/off events;
* @MLXREG_HOTPLUG_LC_SYNCED: entry for line card synchronization events, coming
* after hardware-firmware synchronization handshake;
* @MLXREG_HOTPLUG_LC_READY: entry for line card ready events, indicating line card
PHYs ready / unready state;
* @MLXREG_HOTPLUG_LC_ACTIVE: entry for line card active events, indicating firmware
* availability / unavailability for the ports on line card;
* @MLXREG_HOTPLUG_LC_THERMAL: entry for line card thermal shutdown events, positive
* event indicates that system should power off the line
* card for which this event has been received;
*/
enum mlxreg_hotplug_kind {
MLXREG_HOTPLUG_DEVICE_NA = 0,
MLXREG_HOTPLUG_LC_PRESENT = 1,
MLXREG_HOTPLUG_LC_VERIFIED = 2,
MLXREG_HOTPLUG_LC_POWERED = 3,
MLXREG_HOTPLUG_LC_SYNCED = 4,
MLXREG_HOTPLUG_LC_READY = 5,
MLXREG_HOTPLUG_LC_ACTIVE = 6,
MLXREG_HOTPLUG_LC_THERMAL = 7,
};
/**
* enum mlxreg_hotplug_device_action - hotplug device action required for
* driver's connectivity
*
* @MLXREG_HOTPLUG_DEVICE_DEFAULT_ACTION: probe device for 'on' event, remove
* for 'off' event;
* @MLXREG_HOTPLUG_DEVICE_PLATFORM_ACTION: probe platform device for 'on'
* event, remove for 'off' event;
* @MLXREG_HOTPLUG_DEVICE_NO_ACTION: no connectivity action is required;
*/
enum mlxreg_hotplug_device_action {
MLXREG_HOTPLUG_DEVICE_DEFAULT_ACTION = 0,
MLXREG_HOTPLUG_DEVICE_PLATFORM_ACTION = 1,
MLXREG_HOTPLUG_DEVICE_NO_ACTION = 2,
};
/**
* struct mlxreg_core_hotplug_notifier - hotplug notifier block:
*
* @identity: notifier identity name;
* @handle: user handle to be passed by user handler function;
* @user_handler: user handler function associated with the event;
*/
struct mlxreg_core_hotplug_notifier {
char identity[MLXREG_CORE_LABEL_MAX_SIZE];
void *handle;
int (*user_handler)(void *handle, enum mlxreg_hotplug_kind kind, u8 action);
};
/**
* struct mlxreg_hotplug_device - I2C device data:
*
* @adapter: I2C device adapter;
* @client: I2C device client;
* @brdinfo: device board information;
* @nr: I2C device adapter number, to which device is to be attached;
* @pdev: platform device, if device is instantiated as a platform device;
* @action: action to be performed upon event receiving;
* @handle: user handle to be passed by user handler function;
* @user_handler: user handler function associated with the event;
* @notifier: pointer to event notifier block;
*
* Structure represents I2C hotplug device static data (board topology) and
* dynamic data (related kernel objects handles).
*/
struct mlxreg_hotplug_device {
struct i2c_adapter *adapter;
struct i2c_client *client;
struct i2c_board_info *brdinfo;
int nr;
struct platform_device *pdev;
enum mlxreg_hotplug_device_action action;
void *handle;
int (*user_handler)(void *handle, enum mlxreg_hotplug_kind kind, u8 action);
struct mlxreg_core_hotplug_notifier *notifier;
};
/**
* struct mlxreg_core_data - attributes control data:
*
* @label: attribute label;
* @reg: attribute register;
* @mask: attribute access mask;
* @bit: attribute effective bit;
* @capability: attribute capability register;
* @reg_prsnt: attribute presence register;
* @reg_sync: attribute synch register;
* @reg_pwr: attribute power register;
* @reg_ena: attribute enable register;
* @mode: access mode;
* @np - pointer to node platform associated with attribute;
* @hpdev - hotplug device data;
* @notifier: pointer to event notifier block;
* @health_cntr: dynamic device health indication counter;
* @attached: true if device has been attached after good health indication;
* @regnum: number of registers occupied by multi-register attribute;
* @slot: slot number, at which device is located;
* @secured: if set indicates that entry access is secured;
*/
struct mlxreg_core_data {
char label[MLXREG_CORE_LABEL_MAX_SIZE];
u32 reg;
u32 mask;
u32 bit;
u32 capability;
u32 reg_prsnt;
u32 reg_sync;
u32 reg_pwr;
u32 reg_ena;
umode_t mode;
struct device_node *np;
struct mlxreg_hotplug_device hpdev;
struct mlxreg_core_hotplug_notifier *notifier;
u32 health_cntr;
bool attached;
u8 regnum;
u8 slot;
u8 secured;
};
/**
* struct mlxreg_core_item - same type components controlled by the driver:
*
* @data: component data;
* @kind: kind of hotplug attribute;
* @aggr_mask: group aggregation mask;
* @reg: group interrupt status register;
* @mask: group interrupt mask;
* @capability: group capability register;
* @cache: last status value for elements fro the same group;
* @count: number of available elements in the group;
* @ind: element's index inside the group;
* @inversed: if 0: 0 for signal status is OK, if 1 - 1 is OK;
* @health: true if device has health indication, false in other case;
*/
struct mlxreg_core_item {
struct mlxreg_core_data *data;
enum mlxreg_hotplug_kind kind;
u32 aggr_mask;
u32 reg;
u32 mask;
u32 capability;
u32 cache;
u8 count;
u8 ind;
u8 inversed;
u8 health;
};
/**
* struct mlxreg_core_platform_data - platform data:
*
* @data: instance private data;
* @regmap: register map of parent device;
* @counter: number of instances;
* @features: supported features of device;
* @version: implementation version;
* @identity: device identity name;
* @capability: device capability register;
*/
struct mlxreg_core_platform_data {
struct mlxreg_core_data *data;
void *regmap;
int counter;
u32 features;
u32 version;
char identity[MLXREG_CORE_LABEL_MAX_SIZE];
u32 capability;
};
/**
* struct mlxreg_core_hotplug_platform_data - hotplug platform data:
*
* @items: same type components with the hotplug capability;
* @irq: platform interrupt number;
* @regmap: register map of parent device;
* @counter: number of the components with the hotplug capability;
* @cell: location of top aggregation interrupt register;
* @mask: top aggregation interrupt common mask;
* @cell_low: location of low aggregation interrupt register;
* @mask_low: low aggregation interrupt common mask;
* @deferred_nr: I2C adapter number must be exist prior probing execution;
* @shift_nr: I2C adapter numbers must be incremented by this value;
* @addr: mapped resource address;
* @handle: handle to be passed by callback;
* @completion_notify: callback to notify when platform driver probing is done;
*/
struct mlxreg_core_hotplug_platform_data {
struct mlxreg_core_item *items;
int irq;
void *regmap;
int counter;
u32 cell;
u32 mask;
u32 cell_low;
u32 mask_low;
int deferred_nr;
int shift_nr;
void __iomem *addr;
void *handle;
int (*completion_notify)(void *handle, int id);
};
#endif /* __LINUX_PLATFORM_DATA_MLXREG_H */
|