Viewing file:  workqueue.h (24.4 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0 */
/*
* workqueue.h --- work queue handling for Linux.
*/
#ifndef _LINUX_WORKQUEUE_H
#define _LINUX_WORKQUEUE_H
#include <linux/timer.h>
#include <linux/linkage.h>
#include <linux/bitops.h>
#include <linux/lockdep.h>
#include <linux/threads.h>
#include <linux/atomic.h>
#include <linux/cpumask.h>
#include <linux/rcupdate.h>
#include <linux/workqueue_types.h>
/*
* The first word is the work queue pointer and the flags rolled into
* one
*/
#define work_data_bits(work) ((unsigned long *)(&(work)->data))
enum {
WORK_STRUCT_PENDING_BIT = 0, /* work item is pending execution */
WORK_STRUCT_INACTIVE_BIT= 1, /* work item is inactive */
WORK_STRUCT_PWQ_BIT = 2, /* data points to pwq */
WORK_STRUCT_LINKED_BIT = 3, /* next work is linked to this one */
#ifdef CONFIG_DEBUG_OBJECTS_WORK
WORK_STRUCT_STATIC_BIT = 4, /* static initializer (debugobjects) */
WORK_STRUCT_COLOR_SHIFT = 5, /* color for workqueue flushing */
#else
WORK_STRUCT_COLOR_SHIFT = 4, /* color for workqueue flushing */
#endif
WORK_STRUCT_COLOR_BITS = 4,
WORK_STRUCT_PENDING = 1 << WORK_STRUCT_PENDING_BIT,
WORK_STRUCT_INACTIVE = 1 << WORK_STRUCT_INACTIVE_BIT,
WORK_STRUCT_PWQ = 1 << WORK_STRUCT_PWQ_BIT,
WORK_STRUCT_LINKED = 1 << WORK_STRUCT_LINKED_BIT,
#ifdef CONFIG_DEBUG_OBJECTS_WORK
WORK_STRUCT_STATIC = 1 << WORK_STRUCT_STATIC_BIT,
#else
WORK_STRUCT_STATIC = 0,
#endif
WORK_NR_COLORS = (1 << WORK_STRUCT_COLOR_BITS),
/* not bound to any CPU, prefer the local CPU */
WORK_CPU_UNBOUND = NR_CPUS,
/*
* Reserve 8 bits off of pwq pointer w/ debugobjects turned off.
* This makes pwqs aligned to 256 bytes and allows 16 workqueue
* flush colors.
*/
WORK_STRUCT_FLAG_BITS = WORK_STRUCT_COLOR_SHIFT +
WORK_STRUCT_COLOR_BITS,
/* data contains off-queue information when !WORK_STRUCT_PWQ */
WORK_OFFQ_FLAG_BASE = WORK_STRUCT_COLOR_SHIFT,
__WORK_OFFQ_CANCELING = WORK_OFFQ_FLAG_BASE,
/*
* When a work item is off queue, its high bits point to the last
* pool it was on. Cap at 31 bits and use the highest number to
* indicate that no pool is associated.
*/
WORK_OFFQ_FLAG_BITS = 1,
WORK_OFFQ_POOL_SHIFT = WORK_OFFQ_FLAG_BASE + WORK_OFFQ_FLAG_BITS,
WORK_OFFQ_LEFT = BITS_PER_LONG - WORK_OFFQ_POOL_SHIFT,
WORK_OFFQ_POOL_BITS = WORK_OFFQ_LEFT <= 31 ? WORK_OFFQ_LEFT : 31,
/* bit mask for work_busy() return values */
WORK_BUSY_PENDING = 1 << 0,
WORK_BUSY_RUNNING = 1 << 1,
/* maximum string length for set_worker_desc() */
WORKER_DESC_LEN = 32,
};
/* Convenience constants - of type 'unsigned long', not 'enum'! */
#define WORK_OFFQ_CANCELING (1ul << __WORK_OFFQ_CANCELING)
#define WORK_OFFQ_POOL_NONE ((1ul << WORK_OFFQ_POOL_BITS) - 1)
#define WORK_STRUCT_NO_POOL (WORK_OFFQ_POOL_NONE << WORK_OFFQ_POOL_SHIFT)
#define WORK_STRUCT_FLAG_MASK ((1ul << WORK_STRUCT_FLAG_BITS) - 1)
#define WORK_STRUCT_WQ_DATA_MASK (~WORK_STRUCT_FLAG_MASK)
#define WORK_DATA_INIT() ATOMIC_LONG_INIT((unsigned long)WORK_STRUCT_NO_POOL)
#define WORK_DATA_STATIC_INIT() \
ATOMIC_LONG_INIT((unsigned long)(WORK_STRUCT_NO_POOL | WORK_STRUCT_STATIC))
struct delayed_work {
struct work_struct work;
struct timer_list timer;
/* target workqueue and CPU ->timer uses to queue ->work */
struct workqueue_struct *wq;
int cpu;
};
struct rcu_work {
struct work_struct work;
struct rcu_head rcu;
/* target workqueue ->rcu uses to queue ->work */
struct workqueue_struct *wq;
};
enum wq_affn_scope {
WQ_AFFN_DFL, /* use system default */
WQ_AFFN_CPU, /* one pod per CPU */
WQ_AFFN_SMT, /* one pod poer SMT */
WQ_AFFN_CACHE, /* one pod per LLC */
WQ_AFFN_NUMA, /* one pod per NUMA node */
WQ_AFFN_SYSTEM, /* one pod across the whole system */
WQ_AFFN_NR_TYPES,
};
/**
* struct workqueue_attrs - A struct for workqueue attributes.
*
* This can be used to change attributes of an unbound workqueue.
*/
struct workqueue_attrs {
/**
* @nice: nice level
*/
int nice;
/**
* @cpumask: allowed CPUs
*
* Work items in this workqueue are affine to these CPUs and not allowed
* to execute on other CPUs. A pool serving a workqueue must have the
* same @cpumask.
*/
cpumask_var_t cpumask;
/**
* @__pod_cpumask: internal attribute used to create per-pod pools
*
* Internal use only.
*
* Per-pod unbound worker pools are used to improve locality. Always a
* subset of ->cpumask. A workqueue can be associated with multiple
* worker pools with disjoint @__pod_cpumask's. Whether the enforcement
* of a pool's @__pod_cpumask is strict depends on @affn_strict.
*/
cpumask_var_t __pod_cpumask;
/**
* @affn_strict: affinity scope is strict
*
* If clear, workqueue will make a best-effort attempt at starting the
* worker inside @__pod_cpumask but the scheduler is free to migrate it
* outside.
*
* If set, workers are only allowed to run inside @__pod_cpumask.
*/
bool affn_strict;
/*
* Below fields aren't properties of a worker_pool. They only modify how
* :c:func:`apply_workqueue_attrs` select pools and thus don't
* participate in pool hash calculations or equality comparisons.
*/
/**
* @affn_scope: unbound CPU affinity scope
*
* CPU pods are used to improve execution locality of unbound work
* items. There are multiple pod types, one for each wq_affn_scope, and
* every CPU in the system belongs to one pod in every pod type. CPUs
* that belong to the same pod share the worker pool. For example,
* selecting %WQ_AFFN_NUMA makes the workqueue use a separate worker
* pool for each NUMA node.
*/
enum wq_affn_scope affn_scope;
/**
* @ordered: work items must be executed one by one in queueing order
*/
bool ordered;
};
static inline struct delayed_work *to_delayed_work(struct work_struct *work)
{
return container_of(work, struct delayed_work, work);
}
static inline struct rcu_work *to_rcu_work(struct work_struct *work)
{
return container_of(work, struct rcu_work, work);
}
struct execute_work {
struct work_struct work;
};
#ifdef CONFIG_LOCKDEP
/*
* NB: because we have to copy the lockdep_map, setting _key
* here is required, otherwise it could get initialised to the
* copy of the lockdep_map!
*/
#define __WORK_INIT_LOCKDEP_MAP(n, k) \
.lockdep_map = STATIC_LOCKDEP_MAP_INIT(n, k),
#else
#define __WORK_INIT_LOCKDEP_MAP(n, k)
#endif
#define __WORK_INITIALIZER(n, f) { \
.data = WORK_DATA_STATIC_INIT(), \
.entry = { &(n).entry, &(n).entry }, \
.func = (f), \
__WORK_INIT_LOCKDEP_MAP(#n, &(n)) \
}
#define __DELAYED_WORK_INITIALIZER(n, f, tflags) { \
.work = __WORK_INITIALIZER((n).work, (f)), \
.timer = __TIMER_INITIALIZER(delayed_work_timer_fn,\
(tflags) | TIMER_IRQSAFE), \
}
#define DECLARE_WORK(n, f) \
struct work_struct n = __WORK_INITIALIZER(n, f)
#define DECLARE_DELAYED_WORK(n, f) \
struct delayed_work n = __DELAYED_WORK_INITIALIZER(n, f, 0)
#define DECLARE_DEFERRABLE_WORK(n, f) \
struct delayed_work n = __DELAYED_WORK_INITIALIZER(n, f, TIMER_DEFERRABLE)
#ifdef CONFIG_DEBUG_OBJECTS_WORK
extern void __init_work(struct work_struct *work, int onstack);
extern void destroy_work_on_stack(struct work_struct *work);
extern void destroy_delayed_work_on_stack(struct delayed_work *work);
static inline unsigned int work_static(struct work_struct *work)
{
return *work_data_bits(work) & WORK_STRUCT_STATIC;
}
#else
static inline void __init_work(struct work_struct *work, int onstack) { }
static inline void destroy_work_on_stack(struct work_struct *work) { }
static inline void destroy_delayed_work_on_stack(struct delayed_work *work) { }
static inline unsigned int work_static(struct work_struct *work) { return 0; }
#endif
/*
* initialize all of a work item in one go
*
* NOTE! No point in using "atomic_long_set()": using a direct
* assignment of the work data initializer allows the compiler
* to generate better code.
*/
#ifdef CONFIG_LOCKDEP
#define __INIT_WORK_KEY(_work, _func, _onstack, _key) \
do { \
__init_work((_work), _onstack); \
(_work)->data = (atomic_long_t) WORK_DATA_INIT(); \
lockdep_init_map(&(_work)->lockdep_map, "(work_completion)"#_work, (_key), 0); \
INIT_LIST_HEAD(&(_work)->entry); \
(_work)->func = (_func); \
} while (0)
#else
#define __INIT_WORK_KEY(_work, _func, _onstack, _key) \
do { \
__init_work((_work), _onstack); \
(_work)->data = (atomic_long_t) WORK_DATA_INIT(); \
INIT_LIST_HEAD(&(_work)->entry); \
(_work)->func = (_func); \
} while (0)
#endif
#define __INIT_WORK(_work, _func, _onstack) \
do { \
static __maybe_unused struct lock_class_key __key; \
\
__INIT_WORK_KEY(_work, _func, _onstack, &__key); \
} while (0)
#define INIT_WORK(_work, _func) \
__INIT_WORK((_work), (_func), 0)
#define INIT_WORK_ONSTACK(_work, _func) \
__INIT_WORK((_work), (_func), 1)
#define INIT_WORK_ONSTACK_KEY(_work, _func, _key) \
__INIT_WORK_KEY((_work), (_func), 1, _key)
#define __INIT_DELAYED_WORK(_work, _func, _tflags) \
do { \
INIT_WORK(&(_work)->work, (_func)); \
__init_timer(&(_work)->timer, \
delayed_work_timer_fn, \
(_tflags) | TIMER_IRQSAFE); \
} while (0)
#define __INIT_DELAYED_WORK_ONSTACK(_work, _func, _tflags) \
do { \
INIT_WORK_ONSTACK(&(_work)->work, (_func)); \
__init_timer_on_stack(&(_work)->timer, \
delayed_work_timer_fn, \
(_tflags) | TIMER_IRQSAFE); \
} while (0)
#define INIT_DELAYED_WORK(_work, _func) \
__INIT_DELAYED_WORK(_work, _func, 0)
#define INIT_DELAYED_WORK_ONSTACK(_work, _func) \
__INIT_DELAYED_WORK_ONSTACK(_work, _func, 0)
#define INIT_DEFERRABLE_WORK(_work, _func) \
__INIT_DELAYED_WORK(_work, _func, TIMER_DEFERRABLE)
#define INIT_DEFERRABLE_WORK_ONSTACK(_work, _func) \
__INIT_DELAYED_WORK_ONSTACK(_work, _func, TIMER_DEFERRABLE)
#define INIT_RCU_WORK(_work, _func) \
INIT_WORK(&(_work)->work, (_func))
#define INIT_RCU_WORK_ONSTACK(_work, _func) \
INIT_WORK_ONSTACK(&(_work)->work, (_func))
/**
* work_pending - Find out whether a work item is currently pending
* @work: The work item in question
*/
#define work_pending(work) \
test_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))
/**
* delayed_work_pending - Find out whether a delayable work item is currently
* pending
* @w: The work item in question
*/
#define delayed_work_pending(w) \
work_pending(&(w)->work)
/*
* Workqueue flags and constants. For details, please refer to
* Documentation/core-api/workqueue.rst.
*/
enum {
WQ_UNBOUND = 1 << 1, /* not bound to any cpu */
WQ_FREEZABLE = 1 << 2, /* freeze during suspend */
WQ_MEM_RECLAIM = 1 << 3, /* may be used for memory reclaim */
WQ_HIGHPRI = 1 << 4, /* high priority */
WQ_CPU_INTENSIVE = 1 << 5, /* cpu intensive workqueue */
WQ_SYSFS = 1 << 6, /* visible in sysfs, see workqueue_sysfs_register() */
/*
* Per-cpu workqueues are generally preferred because they tend to
* show better performance thanks to cache locality. Per-cpu
* workqueues exclude the scheduler from choosing the CPU to
* execute the worker threads, which has an unfortunate side effect
* of increasing power consumption.
*
* The scheduler considers a CPU idle if it doesn't have any task
* to execute and tries to keep idle cores idle to conserve power;
* however, for example, a per-cpu work item scheduled from an
* interrupt handler on an idle CPU will force the scheduler to
* execute the work item on that CPU breaking the idleness, which in
* turn may lead to more scheduling choices which are sub-optimal
* in terms of power consumption.
*
* Workqueues marked with WQ_POWER_EFFICIENT are per-cpu by default
* but become unbound if workqueue.power_efficient kernel param is
* specified. Per-cpu workqueues which are identified to
* contribute significantly to power-consumption are identified and
* marked with this flag and enabling the power_efficient mode
* leads to noticeable power saving at the cost of small
* performance disadvantage.
*
* http://thread.gmane.org/gmane.linux.kernel/1480396
*/
WQ_POWER_EFFICIENT = 1 << 7,
__WQ_DESTROYING = 1 << 15, /* internal: workqueue is destroying */
__WQ_DRAINING = 1 << 16, /* internal: workqueue is draining */
__WQ_ORDERED = 1 << 17, /* internal: workqueue is ordered */
__WQ_LEGACY = 1 << 18, /* internal: create*_workqueue() */
__WQ_ORDERED_EXPLICIT = 1 << 19, /* internal: alloc_ordered_workqueue() */
WQ_MAX_ACTIVE = 512, /* I like 512, better ideas? */
WQ_UNBOUND_MAX_ACTIVE = WQ_MAX_ACTIVE,
WQ_DFL_ACTIVE = WQ_MAX_ACTIVE / 2,
};
/*
* System-wide workqueues which are always present.
*
* system_wq is the one used by schedule[_delayed]_work[_on]().
* Multi-CPU multi-threaded. There are users which expect relatively
* short queue flush time. Don't queue works which can run for too
* long.
*
* system_highpri_wq is similar to system_wq but for work items which
* require WQ_HIGHPRI.
*
* system_long_wq is similar to system_wq but may host long running
* works. Queue flushing might take relatively long.
*
* system_unbound_wq is unbound workqueue. Workers are not bound to
* any specific CPU, not concurrency managed, and all queued works are
* executed immediately as long as max_active limit is not reached and
* resources are available.
*
* system_freezable_wq is equivalent to system_wq except that it's
* freezable.
*
* *_power_efficient_wq are inclined towards saving power and converted
* into WQ_UNBOUND variants if 'wq_power_efficient' is enabled; otherwise,
* they are same as their non-power-efficient counterparts - e.g.
* system_power_efficient_wq is identical to system_wq if
* 'wq_power_efficient' is disabled. See WQ_POWER_EFFICIENT for more info.
*/
extern struct workqueue_struct *system_wq;
extern struct workqueue_struct *system_highpri_wq;
extern struct workqueue_struct *system_long_wq;
extern struct workqueue_struct *system_unbound_wq;
extern struct workqueue_struct *system_freezable_wq;
extern struct workqueue_struct *system_power_efficient_wq;
extern struct workqueue_struct *system_freezable_power_efficient_wq;
/**
* alloc_workqueue - allocate a workqueue
* @fmt: printf format for the name of the workqueue
* @flags: WQ_* flags
* @max_active: max in-flight work items per CPU, 0 for default
* remaining args: args for @fmt
*
* Allocate a workqueue with the specified parameters. For detailed
* information on WQ_* flags, please refer to
* Documentation/core-api/workqueue.rst.
*
* RETURNS:
* Pointer to the allocated workqueue on success, %NULL on failure.
*/
__printf(1, 4) struct workqueue_struct *
alloc_workqueue(const char *fmt, unsigned int flags, int max_active, ...);
/**
* alloc_ordered_workqueue - allocate an ordered workqueue
* @fmt: printf format for the name of the workqueue
* @flags: WQ_* flags (only WQ_FREEZABLE and WQ_MEM_RECLAIM are meaningful)
* @args: args for @fmt
*
* Allocate an ordered workqueue. An ordered workqueue executes at
* most one work item at any given time in the queued order. They are
* implemented as unbound workqueues with @max_active of one.
*
* RETURNS:
* Pointer to the allocated workqueue on success, %NULL on failure.
*/
#define alloc_ordered_workqueue(fmt, flags, args...) \
alloc_workqueue(fmt, WQ_UNBOUND | __WQ_ORDERED | \
__WQ_ORDERED_EXPLICIT | (flags), 1, ##args)
#define create_workqueue(name) \
alloc_workqueue("%s", __WQ_LEGACY | WQ_MEM_RECLAIM, 1, (name))
#define create_freezable_workqueue(name) \
alloc_workqueue("%s", __WQ_LEGACY | WQ_FREEZABLE | WQ_UNBOUND | \
WQ_MEM_RECLAIM, 1, (name))
#define create_singlethread_workqueue(name) \
alloc_ordered_workqueue("%s", __WQ_LEGACY | WQ_MEM_RECLAIM, name)
#define from_work(var, callback_work, work_fieldname) \
container_of(callback_work, typeof(*var), work_fieldname)
extern void destroy_workqueue(struct workqueue_struct *wq);
struct workqueue_attrs *alloc_workqueue_attrs(void);
void free_workqueue_attrs(struct workqueue_attrs *attrs);
int apply_workqueue_attrs(struct workqueue_struct *wq,
const struct workqueue_attrs *attrs);
extern int workqueue_unbound_exclude_cpumask(cpumask_var_t cpumask);
extern bool queue_work_on(int cpu, struct workqueue_struct *wq,
struct work_struct *work);
extern bool queue_work_node(int node, struct workqueue_struct *wq,
struct work_struct *work);
extern bool queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
struct delayed_work *work, unsigned long delay);
extern bool mod_delayed_work_on(int cpu, struct workqueue_struct *wq,
struct delayed_work *dwork, unsigned long delay);
extern bool queue_rcu_work(struct workqueue_struct *wq, struct rcu_work *rwork);
extern void __flush_workqueue(struct workqueue_struct *wq);
extern void drain_workqueue(struct workqueue_struct *wq);
extern int schedule_on_each_cpu(work_func_t func);
int execute_in_process_context(work_func_t fn, struct execute_work *);
extern bool flush_work(struct work_struct *work);
extern bool cancel_work(struct work_struct *work);
extern bool cancel_work_sync(struct work_struct *work);
extern bool flush_delayed_work(struct delayed_work *dwork);
extern bool cancel_delayed_work(struct delayed_work *dwork);
extern bool cancel_delayed_work_sync(struct delayed_work *dwork);
extern bool flush_rcu_work(struct rcu_work *rwork);
extern void workqueue_set_max_active(struct workqueue_struct *wq,
int max_active);
extern struct work_struct *current_work(void);
extern bool current_is_workqueue_rescuer(void);
extern bool workqueue_congested(int cpu, struct workqueue_struct *wq);
extern unsigned int work_busy(struct work_struct *work);
extern __printf(1, 2) void set_worker_desc(const char *fmt, ...);
extern void print_worker_info(const char *log_lvl, struct task_struct *task);
extern void show_all_workqueues(void);
extern void show_freezable_workqueues(void);
extern void show_one_workqueue(struct workqueue_struct *wq);
extern void wq_worker_comm(char *buf, size_t size, struct task_struct *task);
/**
* queue_work - queue work on a workqueue
* @wq: workqueue to use
* @work: work to queue
*
* Returns %false if @work was already on a queue, %true otherwise.
*
* We queue the work to the CPU on which it was submitted, but if the CPU dies
* it can be processed by another CPU.
*
* Memory-ordering properties: If it returns %true, guarantees that all stores
* preceding the call to queue_work() in the program order will be visible from
* the CPU which will execute @work by the time such work executes, e.g.,
*
* { x is initially 0 }
*
* CPU0 CPU1
*
* WRITE_ONCE(x, 1); [ @work is being executed ]
* r0 = queue_work(wq, work); r1 = READ_ONCE(x);
*
* Forbids: r0 == true && r1 == 0
*/
static inline bool queue_work(struct workqueue_struct *wq,
struct work_struct *work)
{
return queue_work_on(WORK_CPU_UNBOUND, wq, work);
}
/**
* queue_delayed_work - queue work on a workqueue after delay
* @wq: workqueue to use
* @dwork: delayable work to queue
* @delay: number of jiffies to wait before queueing
*
* Equivalent to queue_delayed_work_on() but tries to use the local CPU.
*/
static inline bool queue_delayed_work(struct workqueue_struct *wq,
struct delayed_work *dwork,
unsigned long delay)
{
return queue_delayed_work_on(WORK_CPU_UNBOUND, wq, dwork, delay);
}
/**
* mod_delayed_work - modify delay of or queue a delayed work
* @wq: workqueue to use
* @dwork: work to queue
* @delay: number of jiffies to wait before queueing
*
* mod_delayed_work_on() on local CPU.
*/
static inline bool mod_delayed_work(struct workqueue_struct *wq,
struct delayed_work *dwork,
unsigned long delay)
{
return mod_delayed_work_on(WORK_CPU_UNBOUND, wq, dwork, delay);
}
/**
* schedule_work_on - put work task on a specific cpu
* @cpu: cpu to put the work task on
* @work: job to be done
*
* This puts a job on a specific cpu
*/
static inline bool schedule_work_on(int cpu, struct work_struct *work)
{
return queue_work_on(cpu, system_wq, work);
}
/**
* schedule_work - put work task in global workqueue
* @work: job to be done
*
* Returns %false if @work was already on the kernel-global workqueue and
* %true otherwise.
*
* This puts a job in the kernel-global workqueue if it was not already
* queued and leaves it in the same position on the kernel-global
* workqueue otherwise.
*
* Shares the same memory-ordering properties of queue_work(), cf. the
* DocBook header of queue_work().
*/
static inline bool schedule_work(struct work_struct *work)
{
return queue_work(system_wq, work);
}
/*
* Detect attempt to flush system-wide workqueues at compile time when possible.
* Warn attempt to flush system-wide workqueues at runtime.
*
* See https://lkml.kernel.org/r/[email protected]
* for reasons and steps for converting system-wide workqueues into local workqueues.
*/
extern void __warn_flushing_systemwide_wq(void)
__compiletime_warning("Please avoid flushing system-wide workqueues.");
/* Please stop using this function, for this function will be removed in near future. */
#define flush_scheduled_work() \
({ \
__warn_flushing_systemwide_wq(); \
__flush_workqueue(system_wq); \
})
#define flush_workqueue(wq) \
({ \
struct workqueue_struct *_wq = (wq); \
\
if ((__builtin_constant_p(_wq == system_wq) && \
_wq == system_wq) || \
(__builtin_constant_p(_wq == system_highpri_wq) && \
_wq == system_highpri_wq) || \
(__builtin_constant_p(_wq == system_long_wq) && \
_wq == system_long_wq) || \
(__builtin_constant_p(_wq == system_unbound_wq) && \
_wq == system_unbound_wq) || \
(__builtin_constant_p(_wq == system_freezable_wq) && \
_wq == system_freezable_wq) || \
(__builtin_constant_p(_wq == system_power_efficient_wq) && \
_wq == system_power_efficient_wq) || \
(__builtin_constant_p(_wq == system_freezable_power_efficient_wq) && \
_wq == system_freezable_power_efficient_wq)) \
__warn_flushing_systemwide_wq(); \
__flush_workqueue(_wq); \
})
/**
* schedule_delayed_work_on - queue work in global workqueue on CPU after delay
* @cpu: cpu to use
* @dwork: job to be done
* @delay: number of jiffies to wait
*
* After waiting for a given time this puts a job in the kernel-global
* workqueue on the specified CPU.
*/
static inline bool schedule_delayed_work_on(int cpu, struct delayed_work *dwork,
unsigned long delay)
{
return queue_delayed_work_on(cpu, system_wq, dwork, delay);
}
/**
* schedule_delayed_work - put work task in global workqueue after delay
* @dwork: job to be done
* @delay: number of jiffies to wait or 0 for immediate execution
*
* After waiting for a given time this puts a job in the kernel-global
* workqueue.
*/
static inline bool schedule_delayed_work(struct delayed_work *dwork,
unsigned long delay)
{
return queue_delayed_work(system_wq, dwork, delay);
}
#ifndef CONFIG_SMP
static inline long work_on_cpu(int cpu, long (*fn)(void *), void *arg)
{
return fn(arg);
}
static inline long work_on_cpu_safe(int cpu, long (*fn)(void *), void *arg)
{
return fn(arg);
}
#else
long work_on_cpu_key(int cpu, long (*fn)(void *),
void *arg, struct lock_class_key *key);
/*
* A new key is defined for each caller to make sure the work
* associated with the function doesn't share its locking class.
*/
#define work_on_cpu(_cpu, _fn, _arg) \
({ \
static struct lock_class_key __key; \
\
work_on_cpu_key(_cpu, _fn, _arg, &__key); \
})
long work_on_cpu_safe_key(int cpu, long (*fn)(void *),
void *arg, struct lock_class_key *key);
/*
* A new key is defined for each caller to make sure the work
* associated with the function doesn't share its locking class.
*/
#define work_on_cpu_safe(_cpu, _fn, _arg) \
({ \
static struct lock_class_key __key; \
\
work_on_cpu_safe_key(_cpu, _fn, _arg, &__key); \
})
#endif /* CONFIG_SMP */
#ifdef CONFIG_FREEZER
extern void freeze_workqueues_begin(void);
extern bool freeze_workqueues_busy(void);
extern void thaw_workqueues(void);
#endif /* CONFIG_FREEZER */
#ifdef CONFIG_SYSFS
int workqueue_sysfs_register(struct workqueue_struct *wq);
#else /* CONFIG_SYSFS */
static inline int workqueue_sysfs_register(struct workqueue_struct *wq)
{ return 0; }
#endif /* CONFIG_SYSFS */
#ifdef CONFIG_WQ_WATCHDOG
void wq_watchdog_touch(int cpu);
#else /* CONFIG_WQ_WATCHDOG */
static inline void wq_watchdog_touch(int cpu) { }
#endif /* CONFIG_WQ_WATCHDOG */
#ifdef CONFIG_SMP
int workqueue_prepare_cpu(unsigned int cpu);
int workqueue_online_cpu(unsigned int cpu);
int workqueue_offline_cpu(unsigned int cpu);
#endif
void __init workqueue_init_early(void);
void __init workqueue_init(void);
void __init workqueue_init_topology(void);
#endif
|