!C99Shell v. 2.0 [PHP 7 Update] [25.02.2019]!

Software: nginx/1.23.4. PHP/5.6.40-65+ubuntu20.04.1+deb.sury.org+1 

uname -a: Linux foro-restaurado-2 5.15.0-1040-oracle #46-Ubuntu SMP Fri Jul 14 21:47:21 UTC 2023
aarch64
 

uid=33(www-data) gid=33(www-data) groups=33(www-data) 

Safe-mode: OFF (not secure)

/usr/src/linux-oracle-6.8-headers-6.8.0-1028/include/net/   drwxr-xr-x
Free 83.34 GB of 96.73 GB (86.16%)
Home    Back    Forward    UPDIR    Refresh    Search    Buffer    Encoder    Tools    Proc.    FTP brute    Sec.    SQL    PHP-code    Update    Feedback    Self remove    Logout    


Viewing file:     bond_options.h (4.81 KB)      -rw-r--r--
Select action/file-type:
(+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) |
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * drivers/net/bond/bond_options.h - bonding options
 * Copyright (c) 2013 Nikolay Aleksandrov <[email protected]>
 */

#ifndef _NET_BOND_OPTIONS_H
#define _NET_BOND_OPTIONS_H

#include <linux/bits.h>
#include <linux/limits.h>
#include <linux/types.h>
#include <linux/string.h>

struct netlink_ext_ack;
struct nlattr;

#define BOND_OPT_MAX_NAMELEN 32
#define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
#define BOND_MODE_ALL_EX(x) (~(x))

/* Option flags:
 * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
 * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
 * BOND_OPTFLAG_RAWVAL - the option parses the value itself
 */
enum {
    BOND_OPTFLAG_NOSLAVES    = BIT(0),
    BOND_OPTFLAG_IFDOWN    = BIT(1),
    BOND_OPTFLAG_RAWVAL    = BIT(2)
};

/* Value type flags:
 * BOND_VALFLAG_DEFAULT - mark the value as default
 * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
 */
enum {
    BOND_VALFLAG_DEFAULT    = BIT(0),
    BOND_VALFLAG_MIN    = BIT(1),
    BOND_VALFLAG_MAX    = BIT(2)
};

/* Option IDs, their bit positions correspond to their IDs */
enum {
    BOND_OPT_MODE,
    BOND_OPT_PACKETS_PER_SLAVE,
    BOND_OPT_XMIT_HASH,
    BOND_OPT_ARP_VALIDATE,
    BOND_OPT_ARP_ALL_TARGETS,
    BOND_OPT_FAIL_OVER_MAC,
    BOND_OPT_ARP_INTERVAL,
    BOND_OPT_ARP_TARGETS,
    BOND_OPT_DOWNDELAY,
    BOND_OPT_UPDELAY,
    BOND_OPT_LACP_RATE,
    BOND_OPT_MINLINKS,
    BOND_OPT_AD_SELECT,
    BOND_OPT_NUM_PEER_NOTIF,
    BOND_OPT_MIIMON,
    BOND_OPT_PRIMARY,
    BOND_OPT_PRIMARY_RESELECT,
    BOND_OPT_USE_CARRIER,
    BOND_OPT_ACTIVE_SLAVE,
    BOND_OPT_QUEUE_ID,
    BOND_OPT_ALL_SLAVES_ACTIVE,
    BOND_OPT_RESEND_IGMP,
    BOND_OPT_LP_INTERVAL,
    BOND_OPT_SLAVES,
    BOND_OPT_TLB_DYNAMIC_LB,
    BOND_OPT_AD_ACTOR_SYS_PRIO,
    BOND_OPT_AD_ACTOR_SYSTEM,
    BOND_OPT_AD_USER_PORT_KEY,
    BOND_OPT_NUM_PEER_NOTIF_ALIAS,
    BOND_OPT_PEER_NOTIF_DELAY,
    BOND_OPT_LACP_ACTIVE,
    BOND_OPT_MISSED_MAX,
    BOND_OPT_NS_TARGETS,
    BOND_OPT_PRIO,
    BOND_OPT_LAST
};

/* This structure is used for storing option values and for passing option
 * values when changing an option. The logic when used as an arg is as follows:
 * - if value != ULLONG_MAX -> parse value
 * - if string != NULL -> parse string
 * - if the opt is RAW data and length less than maxlen,
 *   copy the data to extra storage
 */

#define BOND_OPT_EXTRA_MAXLEN 16
struct bond_opt_value {
    char *string;
    u64 value;
    u32 flags;
    union {
        char extra[BOND_OPT_EXTRA_MAXLEN];
        struct net_device *slave_dev;
    };
};

struct bonding;

struct bond_option {
    int id;
    const char *name;
    const char *desc;
    u32 flags;

    /* unsuppmodes is used to denote modes in which the option isn't
     * supported.
     */
    unsigned long unsuppmodes;
    /* supported values which this option can have, can be a subset of
     * BOND_OPTVAL_RANGE's value range
     */
    const struct bond_opt_value *values;

    int (*set)(struct bonding *bond, const struct bond_opt_value *val);
};

int __bond_opt_set(struct bonding *bond, unsigned int option,
           struct bond_opt_value *val,
           struct nlattr *bad_attr, struct netlink_ext_ack *extack);
int __bond_opt_set_notify(struct bonding *bond, unsigned int option,
              struct bond_opt_value *val);
int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);

const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
                        struct bond_opt_value *val);
const struct bond_option *bond_opt_get(unsigned int option);
const struct bond_option *bond_opt_get_by_name(const char *name);
const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);

/* This helper is used to initialize a bond_opt_value structure for parameter
 * passing. There should be either a valid string or value, but not both.
 * When value is ULLONG_MAX then string will be used.
 */
static inline void __bond_opt_init(struct bond_opt_value *optval,
                   char *string, u64 value,
                   void *extra, size_t extra_len)
{
    memset(optval, 0, sizeof(*optval));
    optval->value = ULLONG_MAX;
    if (value != ULLONG_MAX)
        optval->value = value;
    else if (string)
        optval->string = string;

    if (extra && extra_len <= BOND_OPT_EXTRA_MAXLEN)
        memcpy(optval->extra, extra, extra_len);
}
#define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value, NULL, 0)
#define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX, NULL, 0)
#define bond_opt_initextra(optval, extra, extra_len) \
    __bond_opt_init(optval, NULL, ULLONG_MAX, extra, extra_len)
#define bond_opt_slave_initval(optval, slave_dev, value) \
    __bond_opt_init(optval, NULL, value, slave_dev, sizeof(struct net_device *))

void bond_option_arp_ip_targets_clear(struct bonding *bond);
#if IS_ENABLED(CONFIG_IPV6)
void bond_option_ns_ip6_targets_clear(struct bonding *bond);
#endif
void bond_slave_ns_maddrs_add(struct bonding *bond, struct slave *slave);
void bond_slave_ns_maddrs_del(struct bonding *bond, struct slave *slave);

#endif /* _NET_BOND_OPTIONS_H */

:: Command execute ::

Enter:
 
Select:
 

:: Search ::
  - regexp 

:: Upload ::
 
[ Read-Only ]

:: Make Dir ::
 
[ Read-Only ]
:: Make File ::
 
[ Read-Only ]

:: Go Dir ::
 
:: Go File ::
 

--[ c99shell v. 2.0 [PHP 7 Update] [25.02.2019] maintained by HackingTool | HackingTool | Generation time: 0.0028 ]--