Viewing file:  gsmmux.h (4.4 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/* Copyright (c) 2022/23 Siemens Mobility GmbH */
#ifndef _LINUX_GSMMUX_H
#define _LINUX_GSMMUX_H
#include <linux/const.h>
#include <linux/if.h>
#include <linux/ioctl.h>
#include <linux/types.h>
/*
* flags definition for n_gsm
*
* Used by:
* struct gsm_config_ext.flags
* struct gsm_dlci_config.flags
*/
/* Forces a DLCI reset if set. Otherwise, a DLCI reset is only done if
* incompatible settings were provided. Always cleared on retrieval.
*/
#define GSM_FL_RESTART _BITUL(0)
/**
* struct gsm_config - n_gsm basic configuration parameters
*
* This structure is used in combination with GSMIOC_GETCONF and GSMIOC_SETCONF
* to retrieve and set the basic parameters of an n_gsm ldisc.
* struct gsm_config_ext can be used to configure extended ldisc parameters.
*
* All timers are in units of 1/100th of a second.
*
* @adaption: Convergence layer type
* @encapsulation: Framing (0 = basic option, 1 = advanced option)
* @initiator: Initiator or responder
* @t1: Acknowledgment timer
* @t2: Response timer for multiplexer control channel
* @t3: Response timer for wake-up procedure
* @n2: Maximum number of retransmissions
* @mru: Maximum incoming frame payload size
* @mtu: Maximum outgoing frame payload size
* @k: Window size
* @i: Frame type (1 = UIH, 2 = UI)
* @unused: Can not be used
*/
struct gsm_config
{
unsigned int adaption;
unsigned int encapsulation;
unsigned int initiator;
unsigned int t1;
unsigned int t2;
unsigned int t3;
unsigned int n2;
unsigned int mru;
unsigned int mtu;
unsigned int k;
unsigned int i;
unsigned int unused[8];
};
#define GSMIOC_GETCONF _IOR('G', 0, struct gsm_config)
#define GSMIOC_SETCONF _IOW('G', 1, struct gsm_config)
/**
* struct gsm_netconfig - n_gsm network configuration parameters
*
* This structure is used in combination with GSMIOC_ENABLE_NET and
* GSMIOC_DISABLE_NET to enable or disable a network data connection
* over a mux virtual tty channel. This is for modems that support
* data connections with raw IP frames instead of PPP.
*
* @adaption: Adaption to use in network mode.
* @protocol: Protocol to use - only ETH_P_IP supported.
* @unused2: Can not be used.
* @if_name: Interface name format string.
* @unused: Can not be used.
*/
struct gsm_netconfig {
unsigned int adaption;
unsigned short protocol;
unsigned short unused2;
char if_name[IFNAMSIZ];
__u8 unused[28];
};
#define GSMIOC_ENABLE_NET _IOW('G', 2, struct gsm_netconfig)
#define GSMIOC_DISABLE_NET _IO('G', 3)
/* get the base tty number for a configured gsmmux tty */
#define GSMIOC_GETFIRST _IOR('G', 4, __u32)
/**
* struct gsm_config_ext - n_gsm extended configuration parameters
*
* This structure is used in combination with GSMIOC_GETCONF_EXT and
* GSMIOC_SETCONF_EXT to retrieve and set the extended parameters of an
* n_gsm ldisc.
*
* All timers are in units of 1/100th of a second.
*
* @keep_alive: Control channel keep-alive in 1/100th of a second (0 to disable).
* @wait_config: Wait for DLCI config before opening virtual link?
* @flags: Mux specific flags.
* @reserved: For future use, must be initialized to zero.
*/
struct gsm_config_ext {
__u32 keep_alive;
__u32 wait_config;
__u32 flags;
__u32 reserved[5];
};
#define GSMIOC_GETCONF_EXT _IOR('G', 5, struct gsm_config_ext)
#define GSMIOC_SETCONF_EXT _IOW('G', 6, struct gsm_config_ext)
/**
* struct gsm_dlci_config - n_gsm channel configuration parameters
*
* This structure is used in combination with GSMIOC_GETCONF_DLCI and
* GSMIOC_SETCONF_DLCI to retrieve and set the channel specific parameters
* of an n_gsm ldisc.
*
* Set the channel accordingly before calling GSMIOC_GETCONF_DLCI.
*
* @channel: DLCI (0 for the associated DLCI).
* @adaption: Convergence layer type.
* @mtu: Maximum transfer unit.
* @priority: Priority (0 for default value).
* @i: Frame type (1 = UIH, 2 = UI).
* @k: Window size (0 for default value).
* @flags: DLCI specific flags.
* @reserved: For future use, must be initialized to zero.
*/
struct gsm_dlci_config {
__u32 channel;
__u32 adaption;
__u32 mtu;
__u32 priority;
__u32 i;
__u32 k;
__u32 flags;
__u32 reserved[7];
};
#define GSMIOC_GETCONF_DLCI _IOWR('G', 7, struct gsm_dlci_config)
#define GSMIOC_SETCONF_DLCI _IOW('G', 8, struct gsm_dlci_config)
#endif
|