Viewing file:  vmlinux.lds.h (32.1 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* Helper macros to support writing architecture specific
* linker scripts.
*
* A minimal linker scripts has following content:
* [This is a sample, architectures may have special requiriements]
*
* OUTPUT_FORMAT(...)
* OUTPUT_ARCH(...)
* ENTRY(...)
* SECTIONS
* {
* . = START;
* __init_begin = .;
* HEAD_TEXT_SECTION
* INIT_TEXT_SECTION(PAGE_SIZE)
* INIT_DATA_SECTION(...)
* PERCPU_SECTION(CACHELINE_SIZE)
* __init_end = .;
*
* _stext = .;
* TEXT_SECTION = 0
* _etext = .;
*
* _sdata = .;
* RO_DATA(PAGE_SIZE)
* RW_DATA(...)
* _edata = .;
*
* EXCEPTION_TABLE(...)
*
* BSS_SECTION(0, 0, 0)
* _end = .;
*
* STABS_DEBUG
* DWARF_DEBUG
* ELF_DETAILS
*
* DISCARDS // must be the last
* }
*
* [__init_begin, __init_end] is the init section that may be freed after init
* // __init_begin and __init_end should be page aligned, so that we can
* // free the whole .init memory
* [_stext, _etext] is the text section
* [_sdata, _edata] is the data section
*
* Some of the included output section have their own set of constants.
* Examples are: [__initramfs_start, __initramfs_end] for initramfs and
* [__nosave_begin, __nosave_end] for the nosave data
*/
#ifndef LOAD_OFFSET
#define LOAD_OFFSET 0
#endif
/*
* Only some architectures want to have the .notes segment visible in
* a separate PT_NOTE ELF Program Header. When this happens, it needs
* to be visible in both the kernel text's PT_LOAD and the PT_NOTE
* Program Headers. In this case, though, the PT_LOAD needs to be made
* the default again so that all the following sections don't also end
* up in the PT_NOTE Program Header.
*/
#ifdef EMITS_PT_NOTE
#define NOTES_HEADERS :text :note
#define NOTES_HEADERS_RESTORE __restore_ph : { *(.__restore_ph) } :text
#else
#define NOTES_HEADERS
#define NOTES_HEADERS_RESTORE
#endif
/*
* Some architectures have non-executable read-only exception tables.
* They can be added to the RO_DATA segment by specifying their desired
* alignment.
*/
#ifdef RO_EXCEPTION_TABLE_ALIGN
#define RO_EXCEPTION_TABLE EXCEPTION_TABLE(RO_EXCEPTION_TABLE_ALIGN)
#else
#define RO_EXCEPTION_TABLE
#endif
/* Align . to a 8 byte boundary equals to maximum function alignment. */
#define ALIGN_FUNCTION() . = ALIGN(8)
/*
* LD_DEAD_CODE_DATA_ELIMINATION option enables -fdata-sections, which
* generates .data.identifier sections, which need to be pulled in with
* .data. We don't want to pull in .data..other sections, which Linux
* has defined. Same for text and bss.
*
* With LTO_CLANG, the linker also splits sections by default, so we need
* these macros to combine the sections during the final link.
*
* RODATA_MAIN is not used because existing code already defines .rodata.x
* sections to be brought in with rodata.
*/
#if defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) || defined(CONFIG_LTO_CLANG)
#define TEXT_MAIN .text .text.[0-9a-zA-Z_]*
#define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..L* .data..compoundliteral* .data.$__unnamed_* .data.$L*
#define SDATA_MAIN .sdata .sdata.[0-9a-zA-Z_]*
#define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]* .rodata..L*
#define BSS_MAIN .bss .bss.[0-9a-zA-Z_]* .bss..compoundliteral*
#define SBSS_MAIN .sbss .sbss.[0-9a-zA-Z_]*
#else
#define TEXT_MAIN .text
#define DATA_MAIN .data
#define SDATA_MAIN .sdata
#define RODATA_MAIN .rodata
#define BSS_MAIN .bss
#define SBSS_MAIN .sbss
#endif
/*
* GCC 4.5 and later have a 32 bytes section alignment for structures.
* Except GCC 4.9, that feels the need to align on 64 bytes.
*/
#define STRUCT_ALIGNMENT 32
#define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT)
/*
* The order of the sched class addresses are important, as they are
* used to determine the order of the priority of each sched class in
* relation to each other.
*/
#define SCHED_DATA \
STRUCT_ALIGN(); \
__begin_sched_classes = .; \
*(__idle_sched_class) \
*(__fair_sched_class) \
*(__rt_sched_class) \
*(__dl_sched_class) \
*(__stop_sched_class) \
__end_sched_classes = .;
/* The actual configuration determine if the init/exit sections
* are handled as text/data or they can be discarded (which
* often happens at runtime)
*/
#ifdef CONFIG_HOTPLUG_CPU
#define CPU_KEEP(sec) *(.cpu##sec)
#define CPU_DISCARD(sec)
#else
#define CPU_KEEP(sec)
#define CPU_DISCARD(sec) *(.cpu##sec)
#endif
#if defined(CONFIG_MEMORY_HOTPLUG)
#define MEM_KEEP(sec) *(.mem##sec)
#define MEM_DISCARD(sec)
#else
#define MEM_KEEP(sec)
#define MEM_DISCARD(sec) *(.mem##sec)
#endif
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
/*
* The ftrace call sites are logged to a section whose name depends on the
* compiler option used. A given kernel image will only use one, AKA
* FTRACE_CALLSITE_SECTION. We capture all of them here to avoid header
* dependencies for FTRACE_CALLSITE_SECTION's definition.
*
* Need to also make ftrace_stub_graph point to ftrace_stub
* so that the same stub location may have different protocols
* and not mess up with C verifiers.
*/
#define MCOUNT_REC() . = ALIGN(8); \
__start_mcount_loc = .; \
KEEP(*(__mcount_loc)) \
KEEP(*(__patchable_function_entries)) \
__stop_mcount_loc = .; \
ftrace_stub_graph = ftrace_stub;
#else
# ifdef CONFIG_FUNCTION_TRACER
# define MCOUNT_REC() ftrace_stub_graph = ftrace_stub;
# else
# define MCOUNT_REC()
# endif
#endif
#ifdef CONFIG_TRACE_BRANCH_PROFILING
#define LIKELY_PROFILE() __start_annotated_branch_profile = .; \
KEEP(*(_ftrace_annotated_branch)) \
__stop_annotated_branch_profile = .;
#else
#define LIKELY_PROFILE()
#endif
#ifdef CONFIG_PROFILE_ALL_BRANCHES
#define BRANCH_PROFILE() __start_branch_profile = .; \
KEEP(*(_ftrace_branch)) \
__stop_branch_profile = .;
#else
#define BRANCH_PROFILE()
#endif
#ifdef CONFIG_KPROBES
#define KPROBE_BLACKLIST() . = ALIGN(8); \
__start_kprobe_blacklist = .; \
KEEP(*(_kprobe_blacklist)) \
__stop_kprobe_blacklist = .;
#else
#define KPROBE_BLACKLIST()
#endif
#ifdef CONFIG_FUNCTION_ERROR_INJECTION
#define ERROR_INJECT_WHITELIST() STRUCT_ALIGN(); \
__start_error_injection_whitelist = .; \
KEEP(*(_error_injection_whitelist)) \
__stop_error_injection_whitelist = .;
#else
#define ERROR_INJECT_WHITELIST()
#endif
#ifdef CONFIG_EVENT_TRACING
#define FTRACE_EVENTS() . = ALIGN(8); \
__start_ftrace_events = .; \
KEEP(*(_ftrace_events)) \
__stop_ftrace_events = .; \
__start_ftrace_eval_maps = .; \
KEEP(*(_ftrace_eval_map)) \
__stop_ftrace_eval_maps = .;
#else
#define FTRACE_EVENTS()
#endif
#ifdef CONFIG_TRACING
#define TRACE_PRINTKS() __start___trace_bprintk_fmt = .; \
KEEP(*(__trace_printk_fmt)) /* Trace_printk fmt' pointer */ \
__stop___trace_bprintk_fmt = .;
#define TRACEPOINT_STR() __start___tracepoint_str = .; \
KEEP(*(__tracepoint_str)) /* Trace_printk fmt' pointer */ \
__stop___tracepoint_str = .;
#else
#define TRACE_PRINTKS()
#define TRACEPOINT_STR()
#endif
#ifdef CONFIG_FTRACE_SYSCALLS
#define TRACE_SYSCALLS() . = ALIGN(8); \
__start_syscalls_metadata = .; \
KEEP(*(__syscalls_metadata)) \
__stop_syscalls_metadata = .;
#else
#define TRACE_SYSCALLS()
#endif
#ifdef CONFIG_BPF_EVENTS
#define BPF_RAW_TP() STRUCT_ALIGN(); \
__start__bpf_raw_tp = .; \
KEEP(*(__bpf_raw_tp_map)) \
__stop__bpf_raw_tp = .;
#else
#define BPF_RAW_TP()
#endif
#ifdef CONFIG_SERIAL_EARLYCON
#define EARLYCON_TABLE() . = ALIGN(8); \
__earlycon_table = .; \
KEEP(*(__earlycon_table)) \
__earlycon_table_end = .;
#else
#define EARLYCON_TABLE()
#endif
#ifdef CONFIG_SECURITY
#define LSM_TABLE() . = ALIGN(8); \
__start_lsm_info = .; \
KEEP(*(.lsm_info.init)) \
__end_lsm_info = .;
#define EARLY_LSM_TABLE() . = ALIGN(8); \
__start_early_lsm_info = .; \
KEEP(*(.early_lsm_info.init)) \
__end_early_lsm_info = .;
#else
#define LSM_TABLE()
#define EARLY_LSM_TABLE()
#endif
#define ___OF_TABLE(cfg, name) _OF_TABLE_##cfg(name)
#define __OF_TABLE(cfg, name) ___OF_TABLE(cfg, name)
#define OF_TABLE(cfg, name) __OF_TABLE(IS_ENABLED(cfg), name)
#define _OF_TABLE_0(name)
#define _OF_TABLE_1(name) \
. = ALIGN(8); \
__##name##_of_table = .; \
KEEP(*(__##name##_of_table)) \
KEEP(*(__##name##_of_table_end))
#define TIMER_OF_TABLES() OF_TABLE(CONFIG_TIMER_OF, timer)
#define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip)
#define CLK_OF_TABLES() OF_TABLE(CONFIG_COMMON_CLK, clk)
#define RESERVEDMEM_OF_TABLES() OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem)
#define CPU_METHOD_OF_TABLES() OF_TABLE(CONFIG_SMP, cpu_method)
#define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method)
#ifdef CONFIG_ACPI
#define ACPI_PROBE_TABLE(name) \
. = ALIGN(8); \
__##name##_acpi_probe_table = .; \
KEEP(*(__##name##_acpi_probe_table)) \
__##name##_acpi_probe_table_end = .;
#else
#define ACPI_PROBE_TABLE(name)
#endif
#ifdef CONFIG_THERMAL
#define THERMAL_TABLE(name) \
. = ALIGN(8); \
__##name##_thermal_table = .; \
KEEP(*(__##name##_thermal_table)) \
__##name##_thermal_table_end = .;
#else
#define THERMAL_TABLE(name)
#endif
#ifdef CONFIG_DTPM
#define DTPM_TABLE() \
. = ALIGN(8); \
__dtpm_table = .; \
KEEP(*(__dtpm_table)) \
__dtpm_table_end = .;
#else
#define DTPM_TABLE()
#endif
#define KERNEL_DTB() \
STRUCT_ALIGN(); \
__dtb_start = .; \
KEEP(*(.dtb.init.rodata)) \
__dtb_end = .;
/*
* .data section
*/
#define DATA_DATA \
*(.xiptext) \
*(DATA_MAIN) \
*(.data..decrypted) \
*(.ref.data) \
*(.data..shared_aligned) /* percpu related */ \
MEM_KEEP(init.data*) \
MEM_KEEP(exit.data*) \
*(.data.unlikely) \
__start_once = .; \
*(.data.once) \
__end_once = .; \
STRUCT_ALIGN(); \
*(__tracepoints) \
/* implement dynamic printk debug */ \
. = ALIGN(8); \
__start___dyndbg = .; \
KEEP(*(__dyndbg)) \
__stop___dyndbg = .; \
LIKELY_PROFILE() \
BRANCH_PROFILE() \
TRACE_PRINTKS() \
BPF_RAW_TP() \
TRACEPOINT_STR()
/*
* Data section helpers
*/
#define NOSAVE_DATA \
. = ALIGN(PAGE_SIZE); \
__nosave_begin = .; \
*(.data..nosave) \
. = ALIGN(PAGE_SIZE); \
__nosave_end = .;
#define PAGE_ALIGNED_DATA(page_align) \
. = ALIGN(page_align); \
*(.data..page_aligned) \
. = ALIGN(page_align);
#define READ_MOSTLY_DATA(align) \
. = ALIGN(align); \
*(.data..read_mostly) \
. = ALIGN(align);
#define CACHELINE_ALIGNED_DATA(align) \
. = ALIGN(align); \
*(.data..cacheline_aligned)
#define INIT_TASK_DATA(align) \
. = ALIGN(align); \
__start_init_task = .; \
init_thread_union = .; \
init_stack = .; \
KEEP(*(.data..init_task)) \
KEEP(*(.data..init_thread_info)) \
. = __start_init_task + THREAD_SIZE; \
__end_init_task = .;
#define JUMP_TABLE_DATA \
. = ALIGN(8); \
__start___jump_table = .; \
KEEP(*(__jump_table)) \
__stop___jump_table = .;
#define STATIC_CALL_DATA \
. = ALIGN(8); \
__start_static_call_sites = .; \
KEEP(*(.static_call_sites)) \
__stop_static_call_sites = .; \
__start_static_call_tramp_key = .; \
KEEP(*(.static_call_tramp_key)) \
__stop_static_call_tramp_key = .;
/*
* Allow architectures to handle ro_after_init data on their
* own by defining an empty RO_AFTER_INIT_DATA.
*/
#ifndef RO_AFTER_INIT_DATA
#define RO_AFTER_INIT_DATA \
. = ALIGN(8); \
__start_ro_after_init = .; \
*(.data..ro_after_init) \
JUMP_TABLE_DATA \
STATIC_CALL_DATA \
__end_ro_after_init = .;
#endif
/*
* Read only Data
*/
#define RO_DATA(align) \
. = ALIGN((align)); \
.rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
__start_rodata = .; \
*(.rodata) *(.rodata.*) \
SCHED_DATA \
RO_AFTER_INIT_DATA /* Read only after init */ \
. = ALIGN(8); \
__start___tracepoints_ptrs = .; \
KEEP(*(__tracepoints_ptrs)) /* Tracepoints: pointer array */ \
__stop___tracepoints_ptrs = .; \
*(__tracepoints_strings)/* Tracepoints: strings */ \
} \
\
.rodata1 : AT(ADDR(.rodata1) - LOAD_OFFSET) { \
*(.rodata1) \
} \
\
/* PCI quirks */ \
.pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
__start_pci_fixups_early = .; \
KEEP(*(.pci_fixup_early)) \
__end_pci_fixups_early = .; \
__start_pci_fixups_header = .; \
KEEP(*(.pci_fixup_header)) \
__end_pci_fixups_header = .; \
__start_pci_fixups_final = .; \
KEEP(*(.pci_fixup_final)) \
__end_pci_fixups_final = .; \
__start_pci_fixups_enable = .; \
KEEP(*(.pci_fixup_enable)) \
__end_pci_fixups_enable = .; \
__start_pci_fixups_resume = .; \
KEEP(*(.pci_fixup_resume)) \
__end_pci_fixups_resume = .; \
__start_pci_fixups_resume_early = .; \
KEEP(*(.pci_fixup_resume_early)) \
__end_pci_fixups_resume_early = .; \
__start_pci_fixups_suspend = .; \
KEEP(*(.pci_fixup_suspend)) \
__end_pci_fixups_suspend = .; \
__start_pci_fixups_suspend_late = .; \
KEEP(*(.pci_fixup_suspend_late)) \
__end_pci_fixups_suspend_late = .; \
} \
\
/* Built-in firmware blobs */ \
.builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) ALIGN(8) { \
__start_builtin_fw = .; \
KEEP(*(.builtin_fw)) \
__end_builtin_fw = .; \
} \
\
TRACEDATA \
\
PRINTK_INDEX \
\
/* Kernel symbol table: Normal symbols */ \
__ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
__start___ksymtab = .; \
KEEP(*(SORT(___ksymtab+*))) \
__stop___ksymtab = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
__start___ksymtab_gpl = .; \
KEEP(*(SORT(___ksymtab_gpl+*))) \
__stop___ksymtab_gpl = .; \
} \
\
/* Kernel symbol table: Normal symbols */ \
__kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \
__start___kcrctab = .; \
KEEP(*(SORT(___kcrctab+*))) \
__stop___kcrctab = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \
__start___kcrctab_gpl = .; \
KEEP(*(SORT(___kcrctab_gpl+*))) \
__stop___kcrctab_gpl = .; \
} \
\
/* Kernel symbol table: strings */ \
__ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
*(__ksymtab_strings) \
} \
\
/* __*init sections */ \
__init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \
*(.ref.rodata) \
MEM_KEEP(init.rodata) \
MEM_KEEP(exit.rodata) \
} \
\
/* Built-in module parameters. */ \
__param : AT(ADDR(__param) - LOAD_OFFSET) { \
__start___param = .; \
KEEP(*(__param)) \
__stop___param = .; \
} \
\
/* Built-in module versions. */ \
__modver : AT(ADDR(__modver) - LOAD_OFFSET) { \
__start___modver = .; \
KEEP(*(__modver)) \
__stop___modver = .; \
} \
\
RO_EXCEPTION_TABLE \
NOTES \
BTF \
\
. = ALIGN((align)); \
__end_rodata = .;
/*
* .text..L.cfi.jumptable.* contain Control-Flow Integrity (CFI)
* jump table entries.
*/
#ifdef CONFIG_CFI_CLANG
#define TEXT_CFI_JT \
ALIGN_FUNCTION(); \
__cfi_jt_start = .; \
*(.text..L.cfi.jumptable .text..L.cfi.jumptable.*) \
__cfi_jt_end = .;
#else
#define TEXT_CFI_JT
#endif
/*
* Non-instrumentable text section
*/
#define NOINSTR_TEXT \
ALIGN_FUNCTION(); \
__noinstr_text_start = .; \
*(.noinstr.text) \
__noinstr_text_end = .;
/*
* .text section. Map to function alignment to avoid address changes
* during second ld run in second ld pass when generating System.map
*
* TEXT_MAIN here will match .text.fixup and .text.unlikely if dead
* code elimination is enabled, so these sections should be converted
* to use ".." first.
*/
#define TEXT_TEXT \
ALIGN_FUNCTION(); \
*(.text.hot .text.hot.*) \
*(TEXT_MAIN .text.fixup) \
*(.text.unlikely .text.unlikely.*) \
*(.text.unknown .text.unknown.*) \
NOINSTR_TEXT \
*(.text..refcount) \
*(.ref.text) \
*(.text.asan.* .text.tsan.*) \
TEXT_CFI_JT \
MEM_KEEP(init.text*) \
MEM_KEEP(exit.text*) \
/* sched.text is aling to function alignment to secure we have same
* address even at second ld pass when generating System.map */
#define SCHED_TEXT \
ALIGN_FUNCTION(); \
__sched_text_start = .; \
*(.sched.text) \
__sched_text_end = .;
/* spinlock.text is aling to function alignment to secure we have same
* address even at second ld pass when generating System.map */
#define LOCK_TEXT \
ALIGN_FUNCTION(); \
__lock_text_start = .; \
*(.spinlock.text) \
__lock_text_end = .;
#define CPUIDLE_TEXT \
ALIGN_FUNCTION(); \
__cpuidle_text_start = .; \
*(.cpuidle.text) \
__cpuidle_text_end = .;
#define KPROBES_TEXT \
ALIGN_FUNCTION(); \
__kprobes_text_start = .; \
*(.kprobes.text) \
__kprobes_text_end = .;
#define ENTRY_TEXT \
ALIGN_FUNCTION(); \
__entry_text_start = .; \
*(.entry.text) \
__entry_text_end = .;
#define IRQENTRY_TEXT \
ALIGN_FUNCTION(); \
__irqentry_text_start = .; \
*(.irqentry.text) \
__irqentry_text_end = .;
#define SOFTIRQENTRY_TEXT \
ALIGN_FUNCTION(); \
__softirqentry_text_start = .; \
*(.softirqentry.text) \
__softirqentry_text_end = .;
#define STATIC_CALL_TEXT \
ALIGN_FUNCTION(); \
__static_call_text_start = .; \
*(.static_call.text) \
__static_call_text_end = .;
/* Section used for early init (in .S files) */
#define HEAD_TEXT KEEP(*(.head.text))
#define HEAD_TEXT_SECTION \
.head.text : AT(ADDR(.head.text) - LOAD_OFFSET) { \
HEAD_TEXT \
}
/*
* Exception table
*/
#define EXCEPTION_TABLE(align) \
. = ALIGN(align); \
__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { \
__start___ex_table = .; \
KEEP(*(__ex_table)) \
__stop___ex_table = .; \
}
/*
* .BTF
*/
#ifdef CONFIG_DEBUG_INFO_BTF
#define BTF \
.BTF : AT(ADDR(.BTF) - LOAD_OFFSET) { \
__start_BTF = .; \
KEEP(*(.BTF)) \
__stop_BTF = .; \
} \
. = ALIGN(4); \
.BTF_ids : AT(ADDR(.BTF_ids) - LOAD_OFFSET) { \
*(.BTF_ids) \
}
#else
#define BTF
#endif
/*
* Init task
*/
#define INIT_TASK_DATA_SECTION(align) \
. = ALIGN(align); \
.data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) { \
INIT_TASK_DATA(align) \
}
#ifdef CONFIG_CONSTRUCTORS
#define KERNEL_CTORS() . = ALIGN(8); \
__ctors_start = .; \
KEEP(*(SORT(.ctors.*))) \
KEEP(*(.ctors)) \
KEEP(*(SORT(.init_array.*))) \
KEEP(*(.init_array)) \
__ctors_end = .;
#else
#define KERNEL_CTORS()
#endif
/* init and exit section handling */
#define INIT_DATA \
KEEP(*(SORT(___kentry+*))) \
*(.init.data init.data.*) \
MEM_DISCARD(init.data*) \
KERNEL_CTORS() \
MCOUNT_REC() \
*(.init.rodata .init.rodata.*) \
FTRACE_EVENTS() \
TRACE_SYSCALLS() \
KPROBE_BLACKLIST() \
ERROR_INJECT_WHITELIST() \
MEM_DISCARD(init.rodata) \
CLK_OF_TABLES() \
RESERVEDMEM_OF_TABLES() \
TIMER_OF_TABLES() \
CPU_METHOD_OF_TABLES() \
CPUIDLE_METHOD_OF_TABLES() \
KERNEL_DTB() \
IRQCHIP_OF_MATCH_TABLE() \
ACPI_PROBE_TABLE(irqchip) \
ACPI_PROBE_TABLE(timer) \
THERMAL_TABLE(governor) \
DTPM_TABLE() \
EARLYCON_TABLE() \
LSM_TABLE() \
EARLY_LSM_TABLE() \
KUNIT_TABLE()
#define INIT_TEXT \
*(.init.text .init.text.*) \
*(.text.startup) \
MEM_DISCARD(init.text*)
#define EXIT_DATA \
*(.exit.data .exit.data.*) \
*(.fini_array .fini_array.*) \
*(.dtors .dtors.*) \
MEM_DISCARD(exit.data*) \
MEM_DISCARD(exit.rodata*)
#define EXIT_TEXT \
*(.exit.text) \
*(.text.exit) \
MEM_DISCARD(exit.text)
#define EXIT_CALL \
*(.exitcall.exit)
/*
* bss (Block Started by Symbol) - uninitialized data
* zeroed during startup
*/
#define SBSS(sbss_align) \
. = ALIGN(sbss_align); \
.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \
*(.dynsbss) \
*(SBSS_MAIN) \
*(.scommon) \
}
/*
* Allow archectures to redefine BSS_FIRST_SECTIONS to add extra
* sections to the front of bss.
*/
#ifndef BSS_FIRST_SECTIONS
#define BSS_FIRST_SECTIONS
#endif
#define BSS(bss_align) \
. = ALIGN(bss_align); \
.bss : AT(ADDR(.bss) - LOAD_OFFSET) { \
BSS_FIRST_SECTIONS \
. = ALIGN(PAGE_SIZE); \
*(.bss..page_aligned) \
. = ALIGN(PAGE_SIZE); \
*(.dynbss) \
*(BSS_MAIN) \
*(COMMON) \
}
/*
* DWARF debug sections.
* Symbols in the DWARF debugging sections are relative to
* the beginning of the section so we begin them at 0.
*/
#define DWARF_DEBUG \
/* DWARF 1 */ \
.debug 0 : { *(.debug) } \
.line 0 : { *(.line) } \
/* GNU DWARF 1 extensions */ \
.debug_srcinfo 0 : { *(.debug_srcinfo) } \
.debug_sfnames 0 : { *(.debug_sfnames) } \
/* DWARF 1.1 and DWARF 2 */ \
.debug_aranges 0 : { *(.debug_aranges) } \
.debug_pubnames 0 : { *(.debug_pubnames) } \
/* DWARF 2 */ \
.debug_info 0 : { *(.debug_info \
.gnu.linkonce.wi.*) } \
.debug_abbrev 0 : { *(.debug_abbrev) } \
.debug_line 0 : { *(.debug_line) } \
.debug_frame 0 : { *(.debug_frame) } \
.debug_str 0 : { *(.debug_str) } \
.debug_loc 0 : { *(.debug_loc) } \
.debug_macinfo 0 : { *(.debug_macinfo) } \
.debug_pubtypes 0 : { *(.debug_pubtypes) } \
/* DWARF 3 */ \
.debug_ranges 0 : { *(.debug_ranges) } \
/* SGI/MIPS DWARF 2 extensions */ \
.debug_weaknames 0 : { *(.debug_weaknames) } \
.debug_funcnames 0 : { *(.debug_funcnames) } \
.debug_typenames 0 : { *(.debug_typenames) } \
.debug_varnames 0 : { *(.debug_varnames) } \
/* GNU DWARF 2 extensions */ \
.debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) } \
.debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) } \
/* DWARF 4 */ \
.debug_types 0 : { *(.debug_types) } \
/* DWARF 5 */ \
.debug_addr 0 : { *(.debug_addr) } \
.debug_line_str 0 : { *(.debug_line_str) } \
.debug_loclists 0 : { *(.debug_loclists) } \
.debug_macro 0 : { *(.debug_macro) } \
.debug_names 0 : { *(.debug_names) } \
.debug_rnglists 0 : { *(.debug_rnglists) } \
.debug_str_offsets 0 : { *(.debug_str_offsets) }
/* Stabs debugging sections. */
#define STABS_DEBUG \
.stab 0 : { *(.stab) } \
.stabstr 0 : { *(.stabstr) } \
.stab.excl 0 : { *(.stab.excl) } \
.stab.exclstr 0 : { *(.stab.exclstr) } \
.stab.index 0 : { *(.stab.index) } \
.stab.indexstr 0 : { *(.stab.indexstr) }
/* Required sections not related to debugging. */
#define ELF_DETAILS \
.comment 0 : { *(.comment) } \
.symtab 0 : { *(.symtab) } \
.strtab 0 : { *(.strtab) } \
.shstrtab 0 : { *(.shstrtab) }
#ifdef CONFIG_GENERIC_BUG
#define BUG_TABLE \
. = ALIGN(8); \
__bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \
__start___bug_table = .; \
KEEP(*(__bug_table)) \
__stop___bug_table = .; \
}
#else
#define BUG_TABLE
#endif
#ifdef CONFIG_UNWINDER_ORC
#define ORC_UNWIND_TABLE \
. = ALIGN(4); \
.orc_unwind_ip : AT(ADDR(.orc_unwind_ip) - LOAD_OFFSET) { \
__start_orc_unwind_ip = .; \
KEEP(*(.orc_unwind_ip)) \
__stop_orc_unwind_ip = .; \
} \
. = ALIGN(2); \
.orc_unwind : AT(ADDR(.orc_unwind) - LOAD_OFFSET) { \
__start_orc_unwind = .; \
KEEP(*(.orc_unwind)) \
__stop_orc_unwind = .; \
} \
. = ALIGN(4); \
.orc_lookup : AT(ADDR(.orc_lookup) - LOAD_OFFSET) { \
orc_lookup = .; \
. += (((SIZEOF(.text) + LOOKUP_BLOCK_SIZE - 1) / \
LOOKUP_BLOCK_SIZE) + 1) * 4; \
orc_lookup_end = .; \
}
#else
#define ORC_UNWIND_TABLE
#endif
#ifdef CONFIG_PM_TRACE
#define TRACEDATA \
. = ALIGN(4); \
.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \
__tracedata_start = .; \
KEEP(*(.tracedata)) \
__tracedata_end = .; \
}
#else
#define TRACEDATA
#endif
#ifdef CONFIG_PRINTK_INDEX
#define PRINTK_INDEX \
.printk_index : AT(ADDR(.printk_index) - LOAD_OFFSET) { \
__start_printk_index = .; \
*(.printk_index) \
__stop_printk_index = .; \
}
#else
#define PRINTK_INDEX
#endif
/*
* Discard .note.GNU-stack, which is emitted as PROGBITS by the compiler.
* Otherwise, the type of .notes section would become PROGBITS instead of NOTES.
*/
#define NOTES \
/DISCARD/ : { *(.note.GNU-stack) } \
.notes : AT(ADDR(.notes) - LOAD_OFFSET) { \
__start_notes = .; \
KEEP(*(.note.*)) \
__stop_notes = .; \
} NOTES_HEADERS \
NOTES_HEADERS_RESTORE
#define INIT_SETUP(initsetup_align) \
. = ALIGN(initsetup_align); \
__setup_start = .; \
KEEP(*(.init.setup)) \
__setup_end = .;
#define INIT_CALLS_LEVEL(level) \
__initcall##level##_start = .; \
KEEP(*(.initcall##level##.init)) \
KEEP(*(.initcall##level##s.init)) \
#define INIT_CALLS \
__initcall_start = .; \
KEEP(*(.initcallearly.init)) \
INIT_CALLS_LEVEL(0) \
INIT_CALLS_LEVEL(1) \
INIT_CALLS_LEVEL(2) \
INIT_CALLS_LEVEL(3) \
INIT_CALLS_LEVEL(4) \
INIT_CALLS_LEVEL(5) \
INIT_CALLS_LEVEL(rootfs) \
INIT_CALLS_LEVEL(6) \
INIT_CALLS_LEVEL(7) \
__initcall_end = .;
#define CON_INITCALL \
__con_initcall_start = .; \
KEEP(*(.con_initcall.init)) \
__con_initcall_end = .;
/* Alignment must be consistent with (kunit_suite *) in include/kunit/test.h */
#define KUNIT_TABLE() \
. = ALIGN(8); \
__kunit_suites_start = .; \
KEEP(*(.kunit_test_suites)) \
__kunit_suites_end = .;
#ifdef CONFIG_BLK_DEV_INITRD
#define INIT_RAM_FS \
. = ALIGN(4); \
__initramfs_start = .; \
KEEP(*(.init.ramfs)) \
. = ALIGN(8); \
KEEP(*(.init.ramfs.info))
#else
#define INIT_RAM_FS
#endif
/*
* Memory encryption operates on a page basis. Since we need to clear
* the memory encryption mask for this section, it needs to be aligned
* on a page boundary and be a page-size multiple in length.
*
* Note: We use a separate section so that only this section gets
* decrypted to avoid exposing more than we wish.
*/
#ifdef CONFIG_AMD_MEM_ENCRYPT
#define PERCPU_DECRYPTED_SECTION \
. = ALIGN(PAGE_SIZE); \
*(.data..percpu..decrypted) \
. = ALIGN(PAGE_SIZE);
#else
#define PERCPU_DECRYPTED_SECTION
#endif
/*
* Default discarded sections.
*
* Some archs want to discard exit text/data at runtime rather than
* link time due to cross-section references such as alt instructions,
* bug table, eh_frame, etc. DISCARDS must be the last of output
* section definitions so that such archs put those in earlier section
* definitions.
*/
#ifdef RUNTIME_DISCARD_EXIT
#define EXIT_DISCARDS
#else
#define EXIT_DISCARDS \
EXIT_TEXT \
EXIT_DATA
#endif
/*
* Clang's -fprofile-arcs, -fsanitize=kernel-address, and
* -fsanitize=thread produce unwanted sections (.eh_frame
* and .init_array.*), but CONFIG_CONSTRUCTORS wants to
* keep any .init_array.* sections.
* https://bugs.llvm.org/show_bug.cgi?id=46478
*/
#if defined(CONFIG_GCOV_KERNEL) || defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KCSAN) || \
defined(CONFIG_CFI_CLANG)
# ifdef CONFIG_CONSTRUCTORS
# define SANITIZER_DISCARDS \
*(.eh_frame)
# else
# define SANITIZER_DISCARDS \
*(.init_array) *(.init_array.*) \
*(.eh_frame)
# endif
#else
# define SANITIZER_DISCARDS
#endif
#define COMMON_DISCARDS \
SANITIZER_DISCARDS \
*(.discard) \
*(.discard.*) \
*(.modinfo) \
/* ld.bfd warns about .gnu.version* even when not emitted */ \
*(.gnu.version*) \
#define DISCARDS \
/DISCARD/ : { \
EXIT_DISCARDS \
EXIT_CALL \
COMMON_DISCARDS \
}
/**
* PERCPU_INPUT - the percpu input sections
* @cacheline: cacheline size
*
* The core percpu section names and core symbols which do not rely
* directly upon load addresses.
*
* @cacheline is used to align subsections to avoid false cacheline
* sharing between subsections for different purposes.
*/
#define PERCPU_INPUT(cacheline) \
__per_cpu_start = .; \
*(.data..percpu..first) \
. = ALIGN(PAGE_SIZE); \
*(.data..percpu..page_aligned) \
. = ALIGN(cacheline); \
*(.data..percpu..read_mostly) \
. = ALIGN(cacheline); \
*(.data..percpu) \
*(.data..percpu..shared_aligned) \
PERCPU_DECRYPTED_SECTION \
__per_cpu_end = .;
/**
* PERCPU_VADDR - define output section for percpu area
* @cacheline: cacheline size
* @vaddr: explicit base address (optional)
* @phdr: destination PHDR (optional)
*
* Macro which expands to output section for percpu area.
*
* @cacheline is used to align subsections to avoid false cacheline
* sharing between subsections for different purposes.
*
* If @vaddr is not blank, it specifies explicit base address and all
* percpu symbols will be offset from the given address. If blank,
* @vaddr always equals @laddr + LOAD_OFFSET.
*
* @phdr defines the output PHDR to use if not blank. Be warned that
* output PHDR is sticky. If @phdr is specified, the next output
* section in the linker script will go there too. @phdr should have
* a leading colon.
*
* Note that this macros defines __per_cpu_load as an absolute symbol.
* If there is no need to put the percpu section at a predetermined
* address, use PERCPU_SECTION.
*/
#define PERCPU_VADDR(cacheline, vaddr, phdr) \
__per_cpu_load = .; \
.data..percpu vaddr : AT(__per_cpu_load - LOAD_OFFSET) { \
PERCPU_INPUT(cacheline) \
} phdr \
. = __per_cpu_load + SIZEOF(.data..percpu);
/**
* PERCPU_SECTION - define output section for percpu area, simple version
* @cacheline: cacheline size
*
* Align to PAGE_SIZE and outputs output section for percpu area. This
* macro doesn't manipulate @vaddr or @phdr and __per_cpu_load and
* __per_cpu_start will be identical.
*
* This macro is equivalent to ALIGN(PAGE_SIZE); PERCPU_VADDR(@cacheline,,)
* except that __per_cpu_load is defined as a relative symbol against
* .data..percpu which is required for relocatable x86_32 configuration.
*/
#define PERCPU_SECTION(cacheline) \
. = ALIGN(PAGE_SIZE); \
.data..percpu : AT(ADDR(.data..percpu) - LOAD_OFFSET) { \
__per_cpu_load = .; \
PERCPU_INPUT(cacheline) \
}
/*
* Definition of the high level *_SECTION macros
* They will fit only a subset of the architectures
*/
/*
* Writeable data.
* All sections are combined in a single .data section.
* The sections following CONSTRUCTORS are arranged so their
* typical alignment matches.
* A cacheline is typical/always less than a PAGE_SIZE so
* the sections that has this restriction (or similar)
* is located before the ones requiring PAGE_SIZE alignment.
* NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which
* matches the requirement of PAGE_ALIGNED_DATA.
*
* use 0 as page_align if page_aligned data is not used */
#define RW_DATA(cacheline, pagealigned, inittask) \
. = ALIGN(PAGE_SIZE); \
.data : AT(ADDR(.data) - LOAD_OFFSET) { \
INIT_TASK_DATA(inittask) \
NOSAVE_DATA \
PAGE_ALIGNED_DATA(pagealigned) \
CACHELINE_ALIGNED_DATA(cacheline) \
READ_MOSTLY_DATA(cacheline) \
DATA_DATA \
CONSTRUCTORS \
} \
BUG_TABLE \
#define INIT_TEXT_SECTION(inittext_align) \
. = ALIGN(inittext_align); \
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { \
_sinittext = .; \
INIT_TEXT \
_einittext = .; \
}
#define INIT_DATA_SECTION(initsetup_align) \
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { \
INIT_DATA \
INIT_SETUP(initsetup_align) \
INIT_CALLS \
CON_INITCALL \
INIT_RAM_FS \
}
#define BSS_SECTION(sbss_align, bss_align, stop_align) \
. = ALIGN(sbss_align); \
__bss_start = .; \
SBSS(sbss_align) \
BSS(bss_align) \
. = ALIGN(stop_align); \
__bss_stop = .;
|