Viewing file:  ccc.h (9.81 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2018 Cadence Design Systems Inc.
*
* Author: Boris Brezillon <[email protected]>
*/
#ifndef I3C_CCC_H
#define I3C_CCC_H
#include <linux/bitops.h>
#include <linux/i3c/device.h>
/* I3C CCC (Common Command Codes) related definitions */
#define I3C_CCC_DIRECT BIT(7)
#define I3C_CCC_ID(id, broadcast) \
((id) | ((broadcast) ? 0 : I3C_CCC_DIRECT))
/* Commands valid in both broadcast and unicast modes */
#define I3C_CCC_ENEC(broadcast) I3C_CCC_ID(0x0, broadcast)
#define I3C_CCC_DISEC(broadcast) I3C_CCC_ID(0x1, broadcast)
#define I3C_CCC_ENTAS(as, broadcast) I3C_CCC_ID(0x2 + (as), broadcast)
#define I3C_CCC_RSTDAA(broadcast) I3C_CCC_ID(0x6, broadcast)
#define I3C_CCC_SETMWL(broadcast) I3C_CCC_ID(0x9, broadcast)
#define I3C_CCC_SETMRL(broadcast) I3C_CCC_ID(0xa, broadcast)
#define I3C_CCC_SETXTIME(broadcast) ((broadcast) ? 0x28 : 0x98)
#define I3C_CCC_VENDOR(id, broadcast) ((id) + ((broadcast) ? 0x61 : 0xe0))
/* Broadcast-only commands */
#define I3C_CCC_ENTDAA I3C_CCC_ID(0x7, true)
#define I3C_CCC_DEFSLVS I3C_CCC_ID(0x8, true)
#define I3C_CCC_ENTTM I3C_CCC_ID(0xb, true)
#define I3C_CCC_ENTHDR(x) I3C_CCC_ID(0x20 + (x), true)
/* Unicast-only commands */
#define I3C_CCC_SETDASA I3C_CCC_ID(0x7, false)
#define I3C_CCC_SETNEWDA I3C_CCC_ID(0x8, false)
#define I3C_CCC_GETMWL I3C_CCC_ID(0xb, false)
#define I3C_CCC_GETMRL I3C_CCC_ID(0xc, false)
#define I3C_CCC_GETPID I3C_CCC_ID(0xd, false)
#define I3C_CCC_GETBCR I3C_CCC_ID(0xe, false)
#define I3C_CCC_GETDCR I3C_CCC_ID(0xf, false)
#define I3C_CCC_GETSTATUS I3C_CCC_ID(0x10, false)
#define I3C_CCC_GETACCMST I3C_CCC_ID(0x11, false)
#define I3C_CCC_SETBRGTGT I3C_CCC_ID(0x13, false)
#define I3C_CCC_GETMXDS I3C_CCC_ID(0x14, false)
#define I3C_CCC_GETHDRCAP I3C_CCC_ID(0x15, false)
#define I3C_CCC_GETXTIME I3C_CCC_ID(0x19, false)
#define I3C_CCC_EVENT_SIR BIT(0)
#define I3C_CCC_EVENT_MR BIT(1)
#define I3C_CCC_EVENT_HJ BIT(3)
/**
* struct i3c_ccc_events - payload passed to ENEC/DISEC CCC
*
* @events: bitmask of I3C_CCC_EVENT_xxx events.
*
* Depending on the CCC command, the specific events coming from all devices
* (broadcast version) or a specific device (unicast version) will be
* enabled (ENEC) or disabled (DISEC).
*/
struct i3c_ccc_events {
u8 events;
};
/**
* struct i3c_ccc_mwl - payload passed to SETMWL/GETMWL CCC
*
* @len: maximum write length in bytes
*
* The maximum write length is only applicable to SDR private messages or
* extended Write CCCs (like SETXTIME).
*/
struct i3c_ccc_mwl {
__be16 len;
};
/**
* struct i3c_ccc_mrl - payload passed to SETMRL/GETMRL CCC
*
* @len: maximum read length in bytes
* @ibi_len: maximum IBI payload length
*
* The maximum read length is only applicable to SDR private messages or
* extended Read CCCs (like GETXTIME).
* The IBI length is only valid if the I3C slave is IBI capable
* (%I3C_BCR_IBI_REQ_CAP is set).
*/
struct i3c_ccc_mrl {
__be16 read_len;
u8 ibi_len;
} __packed;
/**
* struct i3c_ccc_dev_desc - I3C/I2C device descriptor used for DEFSLVS
*
* @dyn_addr: dynamic address assigned to the I3C slave or 0 if the entry is
* describing an I2C slave.
* @dcr: DCR value (not applicable to entries describing I2C devices)
* @lvr: LVR value (not applicable to entries describing I3C devices)
* @bcr: BCR value or 0 if this entry is describing an I2C slave
* @static_addr: static address or 0 if the device does not have a static
* address
*
* The DEFSLVS command should be passed an array of i3c_ccc_dev_desc
* descriptors (one entry per I3C/I2C dev controlled by the master).
*/
struct i3c_ccc_dev_desc {
u8 dyn_addr;
union {
u8 dcr;
u8 lvr;
};
u8 bcr;
u8 static_addr;
};
/**
* struct i3c_ccc_defslvs - payload passed to DEFSLVS CCC
*
* @count: number of dev descriptors
* @master: descriptor describing the current master
* @slaves: array of descriptors describing slaves controlled by the
* current master
*
* Information passed to the broadcast DEFSLVS to propagate device
* information to all masters currently acting as slaves on the bus.
* This is only meaningful if you have more than one master.
*/
struct i3c_ccc_defslvs {
u8 count;
struct i3c_ccc_dev_desc master;
struct i3c_ccc_dev_desc slaves[0];
} __packed;
/**
* enum i3c_ccc_test_mode - enum listing all available test modes
*
* @I3C_CCC_EXIT_TEST_MODE: exit test mode
* @I3C_CCC_VENDOR_TEST_MODE: enter vendor test mode
*/
enum i3c_ccc_test_mode {
I3C_CCC_EXIT_TEST_MODE,
I3C_CCC_VENDOR_TEST_MODE,
};
/**
* struct i3c_ccc_enttm - payload passed to ENTTM CCC
*
* @mode: one of the &enum i3c_ccc_test_mode modes
*
* Information passed to the ENTTM CCC to instruct an I3C device to enter a
* specific test mode.
*/
struct i3c_ccc_enttm {
u8 mode;
};
/**
* struct i3c_ccc_setda - payload passed to SETNEWDA and SETDASA CCCs
*
* @addr: dynamic address to assign to an I3C device
*
* Information passed to the SETNEWDA and SETDASA CCCs to assign/change the
* dynamic address of an I3C device.
*/
struct i3c_ccc_setda {
u8 addr;
};
/**
* struct i3c_ccc_getpid - payload passed to GETPID CCC
*
* @pid: 48 bits PID in big endian
*/
struct i3c_ccc_getpid {
u8 pid[6];
};
/**
* struct i3c_ccc_getbcr - payload passed to GETBCR CCC
*
* @bcr: BCR (Bus Characteristic Register) value
*/
struct i3c_ccc_getbcr {
u8 bcr;
};
/**
* struct i3c_ccc_getdcr - payload passed to GETDCR CCC
*
* @dcr: DCR (Device Characteristic Register) value
*/
struct i3c_ccc_getdcr {
u8 dcr;
};
#define I3C_CCC_STATUS_PENDING_INT(status) ((status) & GENMASK(3, 0))
#define I3C_CCC_STATUS_PROTOCOL_ERROR BIT(5)
#define I3C_CCC_STATUS_ACTIVITY_MODE(status) \
(((status) & GENMASK(7, 6)) >> 6)
/**
* struct i3c_ccc_getstatus - payload passed to GETSTATUS CCC
*
* @status: status of the I3C slave (see I3C_CCC_STATUS_xxx macros for more
* information).
*/
struct i3c_ccc_getstatus {
__be16 status;
};
/**
* struct i3c_ccc_getaccmst - payload passed to GETACCMST CCC
*
* @newmaster: address of the master taking bus ownership
*/
struct i3c_ccc_getaccmst {
u8 newmaster;
};
/**
* struct i3c_ccc_bridged_slave_desc - bridged slave descriptor
*
* @addr: dynamic address of the bridged device
* @id: ID of the slave device behind the bridge
*/
struct i3c_ccc_bridged_slave_desc {
u8 addr;
__be16 id;
} __packed;
/**
* struct i3c_ccc_setbrgtgt - payload passed to SETBRGTGT CCC
*
* @count: number of bridged slaves
* @bslaves: bridged slave descriptors
*/
struct i3c_ccc_setbrgtgt {
u8 count;
struct i3c_ccc_bridged_slave_desc bslaves[0];
} __packed;
/**
* enum i3c_sdr_max_data_rate - max data rate values for private SDR transfers
*/
enum i3c_sdr_max_data_rate {
I3C_SDR0_FSCL_MAX,
I3C_SDR1_FSCL_8MHZ,
I3C_SDR2_FSCL_6MHZ,
I3C_SDR3_FSCL_4MHZ,
I3C_SDR4_FSCL_2MHZ,
};
/**
* enum i3c_tsco - clock to data turn-around
*/
enum i3c_tsco {
I3C_TSCO_8NS,
I3C_TSCO_9NS,
I3C_TSCO_10NS,
I3C_TSCO_11NS,
I3C_TSCO_12NS,
};
#define I3C_CCC_MAX_SDR_FSCL_MASK GENMASK(2, 0)
#define I3C_CCC_MAX_SDR_FSCL(x) ((x) & I3C_CCC_MAX_SDR_FSCL_MASK)
/**
* struct i3c_ccc_getmxds - payload passed to GETMXDS CCC
*
* @maxwr: write limitations
* @maxrd: read limitations
* @maxrdturn: maximum read turn-around expressed micro-seconds and
* little-endian formatted
*/
struct i3c_ccc_getmxds {
u8 maxwr;
u8 maxrd;
u8 maxrdturn[3];
} __packed;
#define I3C_CCC_HDR_MODE(mode) BIT(mode)
/**
* struct i3c_ccc_gethdrcap - payload passed to GETHDRCAP CCC
*
* @modes: bitmap of supported HDR modes
*/
struct i3c_ccc_gethdrcap {
u8 modes;
} __packed;
/**
* enum i3c_ccc_setxtime_subcmd - SETXTIME sub-commands
*/
enum i3c_ccc_setxtime_subcmd {
I3C_CCC_SETXTIME_ST = 0x7f,
I3C_CCC_SETXTIME_DT = 0xbf,
I3C_CCC_SETXTIME_ENTER_ASYNC_MODE0 = 0xdf,
I3C_CCC_SETXTIME_ENTER_ASYNC_MODE1 = 0xef,
I3C_CCC_SETXTIME_ENTER_ASYNC_MODE2 = 0xf7,
I3C_CCC_SETXTIME_ENTER_ASYNC_MODE3 = 0xfb,
I3C_CCC_SETXTIME_ASYNC_TRIGGER = 0xfd,
I3C_CCC_SETXTIME_TPH = 0x3f,
I3C_CCC_SETXTIME_TU = 0x9f,
I3C_CCC_SETXTIME_ODR = 0x8f,
};
/**
* struct i3c_ccc_setxtime - payload passed to SETXTIME CCC
*
* @subcmd: one of the sub-commands ddefined in &enum i3c_ccc_setxtime_subcmd
* @data: sub-command payload. Amount of data is determined by
* &i3c_ccc_setxtime->subcmd
*/
struct i3c_ccc_setxtime {
u8 subcmd;
u8 data[0];
} __packed;
#define I3C_CCC_GETXTIME_SYNC_MODE BIT(0)
#define I3C_CCC_GETXTIME_ASYNC_MODE(x) BIT((x) + 1)
#define I3C_CCC_GETXTIME_OVERFLOW BIT(7)
/**
* struct i3c_ccc_getxtime - payload retrieved from GETXTIME CCC
*
* @supported_modes: bitmap describing supported XTIME modes
* @state: current status (enabled mode and overflow status)
* @frequency: slave's internal oscillator frequency in 500KHz steps
* @inaccuracy: slave's internal oscillator inaccuracy in 0.1% steps
*/
struct i3c_ccc_getxtime {
u8 supported_modes;
u8 state;
u8 frequency;
u8 inaccuracy;
} __packed;
/**
* struct i3c_ccc_cmd_payload - CCC payload
*
* @len: payload length
* @data: payload data. This buffer must be DMA-able
*/
struct i3c_ccc_cmd_payload {
u16 len;
void *data;
};
/**
* struct i3c_ccc_cmd_dest - CCC command destination
*
* @addr: can be an I3C device address or the broadcast address if this is a
* broadcast CCC
* @payload: payload to be sent to this device or broadcasted
*/
struct i3c_ccc_cmd_dest {
u8 addr;
struct i3c_ccc_cmd_payload payload;
};
/**
* struct i3c_ccc_cmd - CCC command
*
* @rnw: true if the CCC should retrieve data from the device. Only valid for
* unicast commands
* @id: CCC command id
* @ndests: number of destinations. Should always be one for broadcast commands
* @dests: array of destinations and associated payload for this CCC. Most of
* the time, only one destination is provided
* @err: I3C error code
*/
struct i3c_ccc_cmd {
u8 rnw;
u8 id;
unsigned int ndests;
struct i3c_ccc_cmd_dest *dests;
enum i3c_error_code err;
};
#endif /* I3C_CCC_H */
|