Viewing file:  rt5033-private.h (7.74 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* MFD core driver for Richtek RT5033
*
* Copyright (C) 2014 Samsung Electronics, Co., Ltd.
* Author: Beomho Seo <[email protected]>
*/
#ifndef __RT5033_PRIVATE_H__
#define __RT5033_PRIVATE_H__
enum rt5033_reg {
RT5033_REG_CHG_STAT = 0x00,
RT5033_REG_CHG_CTRL1 = 0x01,
RT5033_REG_CHG_CTRL2 = 0x02,
RT5033_REG_DEVICE_ID = 0x03,
RT5033_REG_CHG_CTRL3 = 0x04,
RT5033_REG_CHG_CTRL4 = 0x05,
RT5033_REG_CHG_CTRL5 = 0x06,
RT5033_REG_RT_CTRL0 = 0x07,
RT5033_REG_CHG_RESET = 0x08,
/* Reserved 0x09~0x18 */
RT5033_REG_RT_CTRL1 = 0x19,
/* Reserved 0x1A~0x20 */
RT5033_REG_FLED_FUNCTION1 = 0x21,
RT5033_REG_FLED_FUNCTION2 = 0x22,
RT5033_REG_FLED_STROBE_CTRL1 = 0x23,
RT5033_REG_FLED_STROBE_CTRL2 = 0x24,
RT5033_REG_FLED_CTRL1 = 0x25,
RT5033_REG_FLED_CTRL2 = 0x26,
RT5033_REG_FLED_CTRL3 = 0x27,
RT5033_REG_FLED_CTRL4 = 0x28,
RT5033_REG_FLED_CTRL5 = 0x29,
/* Reserved 0x2A~0x40 */
RT5033_REG_CTRL = 0x41,
RT5033_REG_BUCK_CTRL = 0x42,
RT5033_REG_LDO_CTRL = 0x43,
/* Reserved 0x44~0x46 */
RT5033_REG_MANUAL_RESET_CTRL = 0x47,
/* Reserved 0x48~0x5F */
RT5033_REG_CHG_IRQ1 = 0x60,
RT5033_REG_CHG_IRQ2 = 0x61,
RT5033_REG_CHG_IRQ3 = 0x62,
RT5033_REG_CHG_IRQ1_CTRL = 0x63,
RT5033_REG_CHG_IRQ2_CTRL = 0x64,
RT5033_REG_CHG_IRQ3_CTRL = 0x65,
RT5033_REG_LED_IRQ_STAT = 0x66,
RT5033_REG_LED_IRQ_CTRL = 0x67,
RT5033_REG_PMIC_IRQ_STAT = 0x68,
RT5033_REG_PMIC_IRQ_CTRL = 0x69,
RT5033_REG_SHDN_CTRL = 0x6A,
RT5033_REG_OFF_EVENT = 0x6B,
RT5033_REG_END,
};
/* RT5033 Charger state register */
#define RT5033_CHG_STAT_MASK 0x20
#define RT5033_CHG_STAT_DISCHARGING 0x00
#define RT5033_CHG_STAT_FULL 0x10
#define RT5033_CHG_STAT_CHARGING 0x20
#define RT5033_CHG_STAT_NOT_CHARGING 0x30
#define RT5033_CHG_STAT_TYPE_MASK 0x60
#define RT5033_CHG_STAT_TYPE_PRE 0x20
#define RT5033_CHG_STAT_TYPE_FAST 0x60
/* RT5033 CHGCTRL1 register */
#define RT5033_CHGCTRL1_IAICR_MASK 0xe0
#define RT5033_CHGCTRL1_MODE_MASK 0x01
/* RT5033 CHGCTRL2 register */
#define RT5033_CHGCTRL2_CV_MASK 0xfc
/* RT5033 CHGCTRL3 register */
#define RT5033_CHGCTRL3_CFO_EN_MASK 0x40
#define RT5033_CHGCTRL3_TIMER_MASK 0x38
#define RT5033_CHGCTRL3_TIMER_EN_MASK 0x01
/* RT5033 CHGCTRL4 register */
#define RT5033_CHGCTRL4_EOC_MASK 0x07
#define RT5033_CHGCTRL4_IPREC_MASK 0x18
/* RT5033 CHGCTRL5 register */
#define RT5033_CHGCTRL5_VPREC_MASK 0x0f
#define RT5033_CHGCTRL5_ICHG_MASK 0xf0
#define RT5033_CHGCTRL5_ICHG_SHIFT 0x04
#define RT5033_CHG_MAX_CURRENT 0x0d
/* RT5033 RT CTRL1 register */
#define RT5033_RT_CTRL1_UUG_MASK 0x02
#define RT5033_RT_HZ_MASK 0x01
/* RT5033 control register */
#define RT5033_CTRL_FCCM_BUCK_MASK BIT(0)
#define RT5033_CTRL_BUCKOMS_MASK BIT(1)
#define RT5033_CTRL_LDOOMS_MASK BIT(2)
#define RT5033_CTRL_SLDOOMS_MASK BIT(3)
#define RT5033_CTRL_EN_BUCK_MASK BIT(4)
#define RT5033_CTRL_EN_LDO_MASK BIT(5)
#define RT5033_CTRL_EN_SAFE_LDO_MASK BIT(6)
#define RT5033_CTRL_LDO_SLEEP_MASK BIT(7)
/* RT5033 BUCK control register */
#define RT5033_BUCK_CTRL_MASK 0x1f
/* RT5033 LDO control register */
#define RT5033_LDO_CTRL_MASK 0x1f
/* RT5033 charger property - model, manufacturer */
#define RT5033_CHARGER_MODEL "RT5033WSC Charger"
#define RT5033_MANUFACTURER "Richtek Technology Corporation"
/*
* RT5033 charger fast-charge current lmits (as in CHGCTRL1 register),
* AICR mode limits the input current for example,
* the AIRC 100 mode limits the input current to 100 mA.
*/
#define RT5033_AICR_100_MODE 0x20
#define RT5033_AICR_500_MODE 0x40
#define RT5033_AICR_700_MODE 0x60
#define RT5033_AICR_900_MODE 0x80
#define RT5033_AICR_1500_MODE 0xc0
#define RT5033_AICR_2000_MODE 0xe0
#define RT5033_AICR_MODE_MASK 0xe0
/* RT5033 use internal timer need to set time */
#define RT5033_FAST_CHARGE_TIMER4 0x00
#define RT5033_FAST_CHARGE_TIMER6 0x01
#define RT5033_FAST_CHARGE_TIMER8 0x02
#define RT5033_FAST_CHARGE_TIMER9 0x03
#define RT5033_FAST_CHARGE_TIMER12 0x04
#define RT5033_FAST_CHARGE_TIMER14 0x05
#define RT5033_FAST_CHARGE_TIMER16 0x06
#define RT5033_INT_TIMER_ENABLE 0x01
/* RT5033 charger termination enable mask */
#define RT5033_TE_ENABLE_MASK 0x08
/*
* RT5033 charger opa mode. RT50300 have two opa mode charger mode
* and boost mode for OTG
*/
#define RT5033_CHARGER_MODE 0x00
#define RT5033_BOOST_MODE 0x01
/* RT5033 charger termination enable */
#define RT5033_TE_ENABLE 0x08
/* RT5033 charger CFO enable */
#define RT5033_CFO_ENABLE 0x40
/* RT5033 charger constant charge voltage (as in CHGCTRL2 register), uV */
#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN 3650000U
#define RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM 25000U
#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX 4400000U
/* RT5033 charger pre-charge current limits (as in CHGCTRL4 register), uA */
#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN 350000U
#define RT5033_CHARGER_PRE_CURRENT_STEP_NUM 100000U
#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX 650000U
/* RT5033 charger fast-charge current (as in CHGCTRL5 register), uA */
#define RT5033_CHARGER_FAST_CURRENT_MIN 700000U
#define RT5033_CHARGER_FAST_CURRENT_STEP_NUM 100000U
#define RT5033_CHARGER_FAST_CURRENT_MAX 2000000U
/*
* RT5033 charger const-charge end of charger current (
* as in CHGCTRL4 register), uA
*/
#define RT5033_CHARGER_EOC_MIN 150000U
#define RT5033_CHARGER_EOC_REF 300000U
#define RT5033_CHARGER_EOC_STEP_NUM1 50000U
#define RT5033_CHARGER_EOC_STEP_NUM2 100000U
#define RT5033_CHARGER_EOC_MAX 600000U
/*
* RT5033 charger pre-charge threshold volt limits
* (as in CHGCTRL5 register), uV
*/
#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN 2300000U
#define RT5033_CHARGER_PRE_THRESHOLD_STEP_NUM 100000U
#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX 3800000U
/*
* RT5033 charger enable UUG, If UUG enable MOS auto control by H/W charger
* circuit.
*/
#define RT5033_CHARGER_UUG_ENABLE 0x02
/* RT5033 charger High impedance mode */
#define RT5033_CHARGER_HZ_DISABLE 0x00
#define RT5033_CHARGER_HZ_ENABLE 0x01
/* RT5033 regulator BUCK output voltage uV */
#define RT5033_REGULATOR_BUCK_VOLTAGE_MIN 1000000U
#define RT5033_REGULATOR_BUCK_VOLTAGE_MAX 3000000U
#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP 100000U
#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM 32
/* RT5033 regulator LDO output voltage uV */
#define RT5033_REGULATOR_LDO_VOLTAGE_MIN 1200000U
#define RT5033_REGULATOR_LDO_VOLTAGE_MAX 3000000U
#define RT5033_REGULATOR_LDO_VOLTAGE_STEP 100000U
#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM 32
/* RT5033 regulator SAFE LDO output voltage uV */
#define RT5033_REGULATOR_SAFE_LDO_VOLTAGE 4900000U
enum rt5033_fuel_reg {
RT5033_FUEL_REG_OCV_H = 0x00,
RT5033_FUEL_REG_OCV_L = 0x01,
RT5033_FUEL_REG_VBAT_H = 0x02,
RT5033_FUEL_REG_VBAT_L = 0x03,
RT5033_FUEL_REG_SOC_H = 0x04,
RT5033_FUEL_REG_SOC_L = 0x05,
RT5033_FUEL_REG_CTRL_H = 0x06,
RT5033_FUEL_REG_CTRL_L = 0x07,
RT5033_FUEL_REG_CRATE = 0x08,
RT5033_FUEL_REG_DEVICE_ID = 0x09,
RT5033_FUEL_REG_AVG_VOLT_H = 0x0A,
RT5033_FUEL_REG_AVG_VOLT_L = 0x0B,
RT5033_FUEL_REG_CONFIG_H = 0x0C,
RT5033_FUEL_REG_CONFIG_L = 0x0D,
/* Reserved 0x0E~0x0F */
RT5033_FUEL_REG_IRQ_CTRL = 0x10,
RT5033_FUEL_REG_IRQ_FLAG = 0x11,
RT5033_FUEL_VMIN = 0x12,
RT5033_FUEL_SMIN = 0x13,
/* Reserved 0x14~0x1F */
RT5033_FUEL_VGCOMP1 = 0x20,
RT5033_FUEL_VGCOMP2 = 0x21,
RT5033_FUEL_VGCOMP3 = 0x22,
RT5033_FUEL_VGCOMP4 = 0x23,
/* Reserved 0x24~0xFD */
RT5033_FUEL_MFA_H = 0xFE,
RT5033_FUEL_MFA_L = 0xFF,
RT5033_FUEL_REG_END,
};
/* RT5033 fuel gauge battery present property */
#define RT5033_FUEL_BAT_PRESENT 0x02
/* RT5033 PMIC interrupts */
#define RT5033_PMIC_IRQ_BUCKOCP BIT(2)
#define RT5033_PMIC_IRQ_BUCKLV BIT(3)
#define RT5033_PMIC_IRQ_SAFELDOLV BIT(4)
#define RT5033_PMIC_IRQ_LDOLV BIT(5)
#define RT5033_PMIC_IRQ_OT BIT(6)
#define RT5033_PMIC_IRQ_VDDA_UV BIT(7)
#endif /* __RT5033_PRIVATE_H__ */
|