!C99Shell v. 2.0 [PHP 7 Update] [25.02.2019]!

Software: nginx/1.23.4. PHP/5.6.40-65+ubuntu20.04.1+deb.sury.org+1 

uname -a: Linux foro-restaurado-2 5.15.0-1040-oracle #46-Ubuntu SMP Fri Jul 14 21:47:21 UTC 2023
aarch64 

uid=33(www-data) gid=33(www-data) groups=33(www-data) 

Safe-mode: OFF (not secure)

/usr/src/linux-oracle-headers-5.15.0-1040/include/linux/ulpi/   drwxr-xr-x
Free 83.24 GB of 96.73 GB (86.06%)
Home    Back    Forward    UPDIR    Refresh    Search    Buffer    Encoder    Tools    Proc.    FTP brute    Sec.    SQL    PHP-code    Update    Feedback    Self remove    Logout    


Viewing file:     regs.h (4.03 KB)      -rw-r--r--
Select action/file-type:
(+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) |
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_ULPI_REGS_H
#define __LINUX_ULPI_REGS_H

/*
 * Macros for Set and Clear
 * See ULPI 1.1 specification to find the registers with Set and Clear offsets
 */
#define ULPI_SET(a)                (a + 1)
#define ULPI_CLR(a)                (a + 2)

/*
 * Register Map
 */
#define ULPI_VENDOR_ID_LOW            0x00
#define ULPI_VENDOR_ID_HIGH            0x01
#define ULPI_PRODUCT_ID_LOW            0x02
#define ULPI_PRODUCT_ID_HIGH            0x03
#define ULPI_FUNC_CTRL                0x04
#define ULPI_IFC_CTRL                0x07
#define ULPI_OTG_CTRL                0x0a
#define ULPI_USB_INT_EN_RISE            0x0d
#define ULPI_USB_INT_EN_FALL            0x10
#define ULPI_USB_INT_STS            0x13
#define ULPI_USB_INT_LATCH            0x14
#define ULPI_DEBUG                0x15
#define ULPI_SCRATCH                0x16
/* Optional Carkit Registers */
#define ULPI_CARKIT_CTRL            0x19
#define ULPI_CARKIT_INT_DELAY            0x1c
#define ULPI_CARKIT_INT_EN            0x1d
#define ULPI_CARKIT_INT_STS            0x20
#define ULPI_CARKIT_INT_LATCH            0x21
#define ULPI_CARKIT_PLS_CTRL            0x22
/* Other Optional Registers */
#define ULPI_TX_POS_WIDTH            0x25
#define ULPI_TX_NEG_WIDTH            0x26
#define ULPI_POLARITY_RECOVERY            0x27
/* Access Extended Register Set */
#define ULPI_ACCESS_EXTENDED            0x2f
/* Vendor Specific */
#define ULPI_VENDOR_SPECIFIC            0x30
/* Extended Registers */
#define ULPI_EXT_VENDOR_SPECIFIC        0x80

/*
 * Register Bits
 */

/* Function Control */
#define ULPI_FUNC_CTRL_XCVRSEL            BIT(0)
#define  ULPI_FUNC_CTRL_XCVRSEL_MASK        0x3
#define  ULPI_FUNC_CTRL_HIGH_SPEED        0x0
#define  ULPI_FUNC_CTRL_FULL_SPEED        0x1
#define  ULPI_FUNC_CTRL_LOW_SPEED        0x2
#define  ULPI_FUNC_CTRL_FS4LS            0x3
#define ULPI_FUNC_CTRL_TERMSELECT        BIT(2)
#define ULPI_FUNC_CTRL_OPMODE            BIT(3)
#define  ULPI_FUNC_CTRL_OPMODE_MASK        (0x3 << 3)
#define  ULPI_FUNC_CTRL_OPMODE_NORMAL        (0x0 << 3)
#define  ULPI_FUNC_CTRL_OPMODE_NONDRIVING    (0x1 << 3)
#define  ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI    (0x2 << 3)
#define  ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP    (0x3 << 3)
#define ULPI_FUNC_CTRL_RESET            BIT(5)
#define ULPI_FUNC_CTRL_SUSPENDM            BIT(6)

/* Interface Control */
#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE        BIT(0)
#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE        BIT(1)
#define ULPI_IFC_CTRL_CARKITMODE        BIT(2)
#define ULPI_IFC_CTRL_CLOCKSUSPENDM        BIT(3)
#define ULPI_IFC_CTRL_AUTORESUME        BIT(4)
#define ULPI_IFC_CTRL_EXTERNAL_VBUS        BIT(5)
#define ULPI_IFC_CTRL_PASSTHRU            BIT(6)
#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE    BIT(7)

/* OTG Control */
#define ULPI_OTG_CTRL_ID_PULLUP            BIT(0)
#define ULPI_OTG_CTRL_DP_PULLDOWN        BIT(1)
#define ULPI_OTG_CTRL_DM_PULLDOWN        BIT(2)
#define ULPI_OTG_CTRL_DISCHRGVBUS        BIT(3)
#define ULPI_OTG_CTRL_CHRGVBUS            BIT(4)
#define ULPI_OTG_CTRL_DRVVBUS            BIT(5)
#define ULPI_OTG_CTRL_DRVVBUS_EXT        BIT(6)
#define ULPI_OTG_CTRL_EXTVBUSIND        BIT(7)

/* USB Interrupt Enable Rising,
 * USB Interrupt Enable Falling,
 * USB Interrupt Status and
 * USB Interrupt Latch
 */
#define ULPI_INT_HOST_DISCONNECT        BIT(0)
#define ULPI_INT_VBUS_VALID            BIT(1)
#define ULPI_INT_SESS_VALID            BIT(2)
#define ULPI_INT_SESS_END            BIT(3)
#define ULPI_INT_IDGRD                BIT(4)

/* Debug */
#define ULPI_DEBUG_LINESTATE0            BIT(0)
#define ULPI_DEBUG_LINESTATE1            BIT(1)

/* Carkit Control */
#define ULPI_CARKIT_CTRL_CARKITPWR        BIT(0)
#define ULPI_CARKIT_CTRL_IDGNDDRV        BIT(1)
#define ULPI_CARKIT_CTRL_TXDEN            BIT(2)
#define ULPI_CARKIT_CTRL_RXDEN            BIT(3)
#define ULPI_CARKIT_CTRL_SPKLEFTEN        BIT(4)
#define ULPI_CARKIT_CTRL_SPKRIGHTEN        BIT(5)
#define ULPI_CARKIT_CTRL_MICEN            BIT(6)

/* Carkit Interrupt Enable */
#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE        BIT(0)
#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL        BIT(1)
#define ULPI_CARKIT_INT_EN_CARINTDET        BIT(2)
#define ULPI_CARKIT_INT_EN_DP_RISE        BIT(3)
#define ULPI_CARKIT_INT_EN_DP_FALL        BIT(4)

/* Carkit Interrupt Status and
 * Carkit Interrupt Latch
 */
#define ULPI_CARKIT_INT_IDFLOAT            BIT(0)
#define ULPI_CARKIT_INT_CARINTDET        BIT(1)
#define ULPI_CARKIT_INT_DP            BIT(2)

/* Carkit Pulse Control*/
#define ULPI_CARKIT_PLS_CTRL_TXPLSEN        BIT(0)
#define ULPI_CARKIT_PLS_CTRL_RXPLSEN        BIT(1)
#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN    BIT(2)
#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN    BIT(3)

#endif /* __LINUX_ULPI_REGS_H */

:: Command execute ::

Enter:
 
Select:
 

:: Search ::
  - regexp 
:: Upload ::
 
[ Read-Only ]

:: Make Dir ::
 
[ Read-Only ]
:: Make File ::
 
[ Read-Only ]

:: Go Dir ::
 
:: Go File ::
 

--[ c99shell v. 2.0 [PHP 7 Update] [25.02.2019] maintained by HackingTool | HackingTool | Generation time: 0.0046 ]--