Viewing file:  u64_stats_sync.h (5.69 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_U64_STATS_SYNC_H
#define _LINUX_U64_STATS_SYNC_H
/*
* Protect against 64-bit values tearing on 32-bit architectures. This is
* typically used for statistics read/update in different subsystems.
*
* Key points :
*
* - Use a seqcount on 32-bit SMP, only disable preemption for 32-bit UP.
* - The whole thing is a no-op on 64-bit architectures.
*
* Usage constraints:
*
* 1) Write side must ensure mutual exclusion, or one seqcount update could
* be lost, thus blocking readers forever.
*
* 2) Write side must disable preemption, or a seqcount reader can preempt the
* writer and also spin forever.
*
* 3) Write side must use the _irqsave() variant if other writers, or a reader,
* can be invoked from an IRQ context.
*
* 4) If reader fetches several counters, there is no guarantee the whole values
* are consistent w.r.t. each other (remember point #2: seqcounts are not
* used for 64bit architectures).
*
* 5) Readers are allowed to sleep or be preempted/interrupted: they perform
* pure reads.
*
* 6) Readers must use both u64_stats_fetch_{begin,retry}_irq() if the stats
* might be updated from a hardirq or softirq context (remember point #1:
* seqcounts are not used for UP kernels). 32-bit UP stat readers could read
* corrupted 64-bit values otherwise.
*
* Usage :
*
* Stats producer (writer) should use following template granted it already got
* an exclusive access to counters (a lock is already taken, or per cpu
* data is used [in a non preemptable context])
*
* spin_lock_bh(...) or other synchronization to get exclusive access
* ...
* u64_stats_update_begin(&stats->syncp);
* u64_stats_add(&stats->bytes64, len); // non atomic operation
* u64_stats_inc(&stats->packets64); // non atomic operation
* u64_stats_update_end(&stats->syncp);
*
* While a consumer (reader) should use following template to get consistent
* snapshot for each variable (but no guarantee on several ones)
*
* u64 tbytes, tpackets;
* unsigned int start;
*
* do {
* start = u64_stats_fetch_begin(&stats->syncp);
* tbytes = u64_stats_read(&stats->bytes64); // non atomic operation
* tpackets = u64_stats_read(&stats->packets64); // non atomic operation
* } while (u64_stats_fetch_retry(&stats->syncp, start));
*
*
* Example of use in drivers/net/loopback.c, using per_cpu containers,
* in BH disabled context.
*/
#include <linux/seqlock.h>
struct u64_stats_sync {
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
seqcount_t seq;
#endif
};
#if BITS_PER_LONG == 64
#include <asm/local64.h>
typedef struct {
local64_t v;
} u64_stats_t ;
static inline u64 u64_stats_read(const u64_stats_t *p)
{
return local64_read(&p->v);
}
static inline void u64_stats_add(u64_stats_t *p, unsigned long val)
{
local64_add(val, &p->v);
}
static inline void u64_stats_inc(u64_stats_t *p)
{
local64_inc(&p->v);
}
#else
typedef struct {
u64 v;
} u64_stats_t;
static inline u64 u64_stats_read(const u64_stats_t *p)
{
return p->v;
}
static inline void u64_stats_add(u64_stats_t *p, unsigned long val)
{
p->v += val;
}
static inline void u64_stats_inc(u64_stats_t *p)
{
p->v++;
}
#endif
#if BITS_PER_LONG == 32 && defined(CONFIG_SMP)
#define u64_stats_init(syncp) seqcount_init(&(syncp)->seq)
#else
static inline void u64_stats_init(struct u64_stats_sync *syncp)
{
}
#endif
static inline void u64_stats_update_begin(struct u64_stats_sync *syncp)
{
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
write_seqcount_begin(&syncp->seq);
#endif
}
static inline void u64_stats_update_end(struct u64_stats_sync *syncp)
{
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
write_seqcount_end(&syncp->seq);
#endif
}
static inline unsigned long
u64_stats_update_begin_irqsave(struct u64_stats_sync *syncp)
{
unsigned long flags = 0;
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
local_irq_save(flags);
write_seqcount_begin(&syncp->seq);
#endif
return flags;
}
static inline void
u64_stats_update_end_irqrestore(struct u64_stats_sync *syncp,
unsigned long flags)
{
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
write_seqcount_end(&syncp->seq);
local_irq_restore(flags);
#endif
}
static inline unsigned int __u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
{
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
return read_seqcount_begin(&syncp->seq);
#else
return 0;
#endif
}
static inline unsigned int u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
{
#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
preempt_disable();
#endif
return __u64_stats_fetch_begin(syncp);
}
static inline bool __u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
unsigned int start)
{
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
return read_seqcount_retry(&syncp->seq, start);
#else
return false;
#endif
}
static inline bool u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
unsigned int start)
{
#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
preempt_enable();
#endif
return __u64_stats_fetch_retry(syncp, start);
}
/*
* In case irq handlers can update u64 counters, readers can use following helpers
* - SMP 32bit arches use seqcount protection, irq safe.
* - UP 32bit must disable irqs.
* - 64bit have no problem atomically reading u64 values, irq safe.
*/
static inline unsigned int u64_stats_fetch_begin_irq(const struct u64_stats_sync *syncp)
{
#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
local_irq_disable();
#endif
return __u64_stats_fetch_begin(syncp);
}
static inline bool u64_stats_fetch_retry_irq(const struct u64_stats_sync *syncp,
unsigned int start)
{
#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
local_irq_enable();
#endif
return __u64_stats_fetch_retry(syncp, start);
}
#endif /* _LINUX_U64_STATS_SYNC_H */
|